How to Change Wifi on Eufy Vacuum

How to Change Wifi on Eufy Vacuum

ByRaphael S. Raygoza

Changing the WiFi network on your Eufy vacuum is simple with the right steps. This guide walks you through disconnecting from the old network, reconnecting to a new one, and troubleshooting common issues. Whether you’ve moved, upgraded your router, or changed your password, we’ve got you covered.

Key Takeaways

  • Use the EufyHome app: All WiFi changes must be done through the official EufyHome app, not the vacuum’s physical buttons.
  • Reset the vacuum if needed: If you can’t connect, a factory reset may be required to clear old network settings.
  • Ensure 2.4GHz network: Most Eufy vacuums only support 2.4GHz WiFi, not 5GHz, so check your router settings.
  • Stay close during setup: Keep your phone and vacuum within 3–5 feet of the router for a strong signal during pairing.
  • Reconnect smart home devices: After changing WiFi, re-link your vacuum to Alexa, Google Assistant, or other smart platforms.
  • Update firmware regularly: Firmware updates can fix connectivity bugs and improve performance.
  • Contact support if stuck: Eufy’s customer service can help with persistent connection problems.

How to Change WiFi on Eufy Vacuum: A Complete Step-by-Step Guide

If you’ve recently moved, upgraded your internet plan, or changed your WiFi password, you might be wondering how to change WiFi on Eufy vacuum. Don’t worry—it’s easier than you think! Eufy robot vacuums are designed to make smart cleaning simple, and updating your network connection is no exception.

In this guide, we’ll walk you through every step of changing the WiFi network on your Eufy vacuum. Whether you own a RoboVac 11S, RoboVac L70, or any other Eufy model, the process is similar. You’ll learn how to disconnect from your old network, connect to a new one, troubleshoot common issues, and keep your vacuum running smoothly.

By the end of this guide, you’ll be able to confidently update your Eufy vacuum’s WiFi settings without frustration. Let’s get started!

Why You Might Need to Change Your Eufy Vacuum’s WiFi

Before diving into the steps, it’s helpful to understand why you might need to change the WiFi on your Eufy vacuum. Here are the most common reasons:

  • Moving to a new home: Your new house likely has a different WiFi network and password.
  • Router upgrade: If you’ve replaced your old router with a newer model, the network name (SSID) or password may have changed.
  • Network name or password change: For security reasons, many people update their WiFi credentials periodically.
  • Switching internet providers: A new ISP often means a new network setup.
  • Adding a mesh network: If you’ve installed a mesh WiFi system like Google Nest or Eero, your vacuum may need to reconnect.

No matter the reason, the process of changing WiFi on Eufy vacuum is straightforward—as long as you follow the right steps.

What You’ll Need Before Starting

Before you begin, make sure you have the following:

  • The EufyHome app: Download it from the Apple App Store or Google Play Store if you haven’t already.
  • Your new WiFi network name and password: Have these ready—you’ll need to enter them during setup.
  • A smartphone or tablet: The app is required for all WiFi changes.
  • Your Eufy vacuum: Make sure it’s charged (at least 30% battery) and turned on.
  • Access to your router: You should be within 3–5 feet of the router for the best signal during pairing.

Having everything ready will save you time and prevent interruptions during the setup process.

Step 1: Open the EufyHome App

The first step to changing WiFi on Eufy vacuum is opening the EufyHome app on your smartphone or tablet.

Launch the App

Tap the EufyHome icon on your device. If you’re not already logged in, enter your account credentials. If you don’t have an account, you’ll need to create one—this is free and only takes a minute.

Check Your Vacuum’s Status

Once logged in, the app will display your connected devices. Look for your Eufy vacuum. If it’s currently connected to WiFi, you’ll see its status (e.g., “Cleaning,” “Charging,” or “Idle”).

Ensure the Vacuum Is Online

If your vacuum shows as “Offline,” it may already be disconnected from WiFi. That’s okay—this guide will help you reconnect it to the new network.

Step 2: Put Your Vacuum in Pairing Mode

To connect your Eufy vacuum to a new WiFi network, you’ll need to put it into pairing mode. This tells the vacuum to search for a new network.

Locate the Reset Button

On most Eufy vacuums, the reset button is a small pinhole located on the bottom or side of the unit. You’ll need a paperclip or SIM ejector tool to press it.

Press and Hold the Reset Button

With the vacuum powered on, press and hold the reset button for about 5–10 seconds. You’ll hear a beep or see a light flash, indicating the vacuum is in pairing mode.

Wait for the Indicator Light

On many models, a blue or white light will blink rapidly when the vacuum is ready to connect. This means it’s searching for a network.

Note: Some Models Use App-Based Pairing

Newer Eufy vacuums, like the RoboVac X8, may not require a physical reset. Instead, the app will guide you through the pairing process. Follow the on-screen instructions if this applies to your model.

Step 3: Connect to the New WiFi Network

Now that your vacuum is in pairing mode, it’s time to connect it to your new WiFi network using the EufyHome app.

Tap “Add Device” in the App

In the EufyHome app, tap the “+” or “Add Device” button. Select “Robot Vacuum” from the list of device types.

Follow the On-Screen Instructions

The app will guide you through the setup. It may ask you to confirm that your vacuum is in pairing mode (with the blinking light). Tap “Next” to continue.

Select Your WiFi Network

The app will scan for available networks. Choose your new WiFi network from the list. If you don’t see it, make sure your phone is connected to the same network and that the vacuum is close to the router.

Enter the WiFi Password

Type in your new WiFi password carefully. Make sure there are no typos—this is a common cause of connection failures. The app may hide the password as you type, so double-check before proceeding.

Wait for Connection

The app will send the network information to your vacuum. This can take 30 seconds to 2 minutes. During this time, the vacuum’s light may blink or change color.

Confirm Successful Connection

Once connected, the app will display a success message. Your vacuum should now appear as “Online” in the device list.

Step 4: Test the Connection

After changing WiFi on Eufy vacuum, it’s important to test that everything is working properly.

Send a Test Command

From the app, tap your vacuum and try sending a simple command—like “Start Cleaning” or “Return to Dock.” If the vacuum responds, the connection is successful.

Check Remote Access

Move away from your home WiFi (e.g., go to another room or outside) and try controlling the vacuum using mobile data. If it works, your remote access is set up correctly.

Verify Smart Home Integration

If you use Alexa or Google Assistant, test voice commands like “Alexa, ask Eufy to start cleaning.” If it works, your smart home integration is active.

What If Your Vacuum Won’t Connect?

Sometimes, changing WiFi on Eufy vacuum doesn’t go as smoothly as planned. Here are common issues and how to fix them.

Issue: Vacuum Doesn’t Appear in the App

If your vacuum doesn’t show up during setup, make sure it’s in pairing mode. Press the reset button again and wait for the blinking light. Also, ensure your phone is connected to the same 2.4GHz network (not 5GHz).

Issue: “Incorrect Password” Error

Double-check your WiFi password. Even a single wrong character can cause this error. Try retyping it slowly. If you’re unsure, log into your router’s admin page to confirm the password.

Issue: Vacuum Connects but Drops Frequently

This could be a signal strength problem. Move your vacuum closer to the router during setup. If the issue persists, consider using a WiFi extender or relocating your router.

Issue: App Says “Connection Failed”

Try restarting your phone, vacuum, and router. Then repeat the setup process. If that doesn’t work, perform a factory reset on the vacuum (see below).

How to Factory Reset Your Eufy Vacuum

If you’re still having trouble changing WiFi on Eufy vacuum, a factory reset may be necessary. This clears all saved settings, including old WiFi networks.

Locate the Reset Button

As before, find the small pinhole reset button on your vacuum.

Press and Hold for 10–15 Seconds

With the vacuum on, press and hold the reset button for 10–15 seconds. You’ll hear multiple beeps or see the light flash rapidly.

Wait for the Vacuum to Restart

The vacuum will power off and back on. This may take 1–2 minutes. Once it’s ready, the light will return to normal.

Reconnect via the App

Now follow the same steps as before: open the app, put the vacuum in pairing mode, and connect to your new WiFi network.

Note: Factory Reset Erases All Settings

This includes scheduled cleanings, map data, and smart home links. You’ll need to reconfigure these after the reset.

Tips for a Smooth WiFi Change

To make changing WiFi on Eufy vacuum as easy as possible, follow these practical tips:

Use a 2.4GHz Network

Most Eufy vacuums only support 2.4GHz WiFi, not 5GHz. Check your router settings and make sure your network is broadcasting on 2.4GHz. If you have a dual-band router, you may need to temporarily disable 5GHz during setup.

Keep Devices Close

Place your phone and vacuum within 3–5 feet of the router during pairing. This ensures a strong signal and reduces connection errors.

Update the App and Firmware

Before starting, make sure the EufyHome app is updated to the latest version. Also, check for firmware updates for your vacuum—these can fix bugs and improve connectivity.

Use a Strong WiFi Password

Avoid using special characters like “@” or “&” in your WiFi password if possible. Some older Eufy models have trouble connecting to passwords with complex symbols.

Reconnect Smart Home Devices

After changing WiFi, you may need to re-link your vacuum to Alexa, Google Assistant, or Apple HomeKit. Open the respective apps and re-enable the Eufy skill or integration.

Save Your Old Network Info

If you’re switching back and forth between networks (e.g., home and vacation home), keep a note of your old WiFi details. This saves time if you need to reconnect later.

Advanced: Using Eufy with Mesh WiFi Systems

If you’ve upgraded to a mesh WiFi system (like Eero, Google Nest, or Netgear Orbi), you may need to take extra steps to connect your Eufy vacuum.

Ensure 2.4GHz Band Is Enabled

Some mesh systems combine 2.4GHz and 5GHz into a single network name (SSID). This can confuse older Eufy vacuums. Log into your mesh system’s app and enable a separate 2.4GHz network.

Assign a Static IP (Optional)

For more stable connections, you can assign a static IP address to your vacuum in your router settings. This prevents the IP from changing and disrupting the connection.

Test Across Nodes

If your home has multiple mesh nodes, test your vacuum’s connection in different rooms. If it drops offline in certain areas, consider adding another node or adjusting placement.

Keeping Your Eufy Vacuum Connected Long-Term

Once you’ve successfully changed WiFi on Eufy vacuum, here’s how to maintain a stable connection:

Regularly Update Firmware

Check the EufyHome app monthly for firmware updates. These often include bug fixes and performance improvements.

Monitor Signal Strength

If your vacuum frequently goes offline, it may be due to weak WiFi. Use a WiFi analyzer app to check signal strength in the areas where your vacuum cleans.

Reboot Your Router Weekly

A simple router restart can resolve many connectivity issues. Set a reminder to reboot your router every Sunday night.

Avoid Network Overload

If too many devices are connected to your WiFi, it can slow down or drop connections. Limit the number of active devices during cleaning cycles.

Conclusion

Changing WiFi on Eufy vacuum doesn’t have to be complicated. With the EufyHome app, a few simple steps, and a little patience, you can easily update your vacuum’s network settings—whether you’ve moved, upgraded your router, or just changed your password.

Remember to use a 2.4GHz network, keep your devices close during setup, and don’t hesitate to perform a factory reset if needed. And if you run into trouble, Eufy’s customer support team is available to help.

By following this guide, you’ll keep your Eufy vacuum connected, responsive, and ready to clean on command. Happy cleaning!

Similar Posts