How to Charge Eufy Doorbell Camera Battery

Charging your Eufy doorbell camera battery is simple when you follow the right steps. This guide walks you through the process, from removing the device to recharging and reinstalling it—plus tips to extend battery life.

Key Takeaways

• Use the correct USB cable and power source: Always use the included USB cable or a high-quality alternative with a 5V/2A adapter for safe and efficient charging.
• Fully remove the doorbell before charging: Never attempt to charge the Eufy doorbell while it’s mounted—this can damage the device or cause safety issues.
• Charge in a dry, temperature-controlled environment: Avoid extreme heat or cold, as they can reduce battery performance and lifespan.
• Monitor charging progress via the Eufy app: The app shows battery percentage and alerts you when charging is complete.
• Reinstall securely after charging: Ensure the doorbell clicks into place and test motion detection and live view post-installation.
• Maintain regular charging habits: Charge every 2–6 months depending on usage to prevent deep discharge and extend battery health.
• Troubleshoot common issues promptly: If the battery won’t charge, check connections, try a different power source, or reset the device.

How to Charge Eufy Doorbell Camera Battery: A Complete Step-by-Step Guide

Your Eufy doorbell camera is a smart, reliable way to keep an eye on your home—day and night. But like any battery-powered device, it needs regular charging to stay operational. Whether you’re a new Eufy owner or just need a refresher, knowing how to charge your Eufy doorbell camera battery correctly is essential for performance, safety, and longevity.

In this comprehensive guide, you’ll learn everything you need to know about charging your Eufy doorbell camera battery—from preparation and removal to recharging, reinstallation, and maintenance. We’ll cover the tools you’ll need, step-by-step instructions, safety tips, troubleshooting advice, and best practices to keep your doorbell running smoothly for years to come.

By the end of this guide, you’ll be confident in handling the charging process like a pro—and your Eufy doorbell will thank you with consistent performance and fewer interruptions.

Why Charging Your Eufy Doorbell Battery Matters

The Eufy doorbell camera runs on a rechargeable lithium-ion battery, which powers its video recording, motion detection, night vision, Wi-Fi connectivity, and two-way audio. Over time, the battery will naturally lose charge—especially if you receive frequent motion alerts or use live view often.

Ignoring low battery warnings can lead to:

• Missed motion events or failed recordings
• Inability to access live video feed
• Complete device shutdown
• Potential damage from deep discharge

Charging your Eufy doorbell on a regular schedule—typically every 2 to 6 months depending on usage—ensures it’s always ready when you need it. Plus, proper charging habits help extend the overall lifespan of the battery, saving you money and hassle in the long run.

What You’ll Need to Charge Your Eufy Doorbell Camera

Before you begin, gather the following items to make the charging process smooth and safe:

• Eufy doorbell camera (obviously!)
• Included USB charging cable (or a high-quality USB-A to Micro-USB or USB-C cable, depending on your model)
• 5V/2A USB power adapter (the one that came with your doorbell or a compatible phone/tablet charger)
• Screwdriver (usually a Phillips #0 or #1, depending on your mounting screws)
• Soft cloth or towel (to protect the doorbell during removal)
• Access to the Eufy Security app (on your smartphone or tablet)

Tip: Avoid using fast chargers or laptop USB ports, as they may not provide consistent power and could affect charging efficiency.

Step-by-Step Guide: How to Charge Your Eufy Doorbell Camera Battery

Step 1: Check the Battery Level in the Eufy App

Before removing your doorbell, check its current battery level using the Eufy Security app. This helps you determine how urgently it needs charging and whether it’s safe to proceed.

• Open the Eufy Security app on your phone.
• Tap on your doorbell camera from the device list.
• Look for the battery icon—usually in the top-right corner of the live view screen.
• The app will display the battery percentage (e.g., “Battery: 15%”).

If the battery is below 20%, it’s time to charge. If it’s critically low (below 5%), charge it as soon as possible to avoid complete shutdown.

Step 2: Turn Off Motion Detection (Optional but Recommended)

While not required, turning off motion detection during charging prevents false alerts or unnecessary recordings while the doorbell is disconnected.

• In the Eufy app, go to your doorbell’s settings.
• Tap Motion Detection and toggle it off.
• You can also disable Human Detection and Package Detection if enabled.

This step is especially helpful if you live in a busy area or have pets that might trigger the sensor during removal.

Step 3: Safely Remove the Eufy Doorbell from the Mount

Now it’s time to physically remove the doorbell. Follow these steps carefully to avoid damaging the device or your wall.

Locate the Security Screw

Most Eufy doorbell models (like the E10, E20, or E30) have a small security screw at the bottom of the device. This prevents theft and ensures the doorbell stays securely mounted.

Unscrew the Security Screw

Use the appropriate screwdriver to loosen and remove the screw. Keep it in a safe place—you’ll need it to reattach the doorbell later.

Gently Slide the Doorbell Off the Mount

Once the screw is removed, gently pull the bottom of the doorbell away from the wall. It should slide downward slightly and then come free from the mounting bracket.

Tip: Place a soft cloth or towel on the ground below to catch the doorbell if it slips.

Step 4: Disconnect the Wires (If Applicable)

If your Eufy doorbell is hardwired (connected to existing doorbell wires), you’ll need to disconnect them before removing the device completely.

• Carefully pull the doorbell away from the wall to expose the wires.
• Gently untwist or unclip the wire connectors.
• Label the wires (e.g., “Front” and “Transform”) with tape if needed for easy reconnection later.

Note: If your doorbell is battery-only (no wires), you can skip this step.

Step 5: Prepare for Charging

With the doorbell removed, it’s time to get it ready for charging.

• Inspect the charging port (usually Micro-USB or USB-C) for dust or debris. Use a dry toothbrush or compressed air to clean it gently.
• Ensure the doorbell is dry and free of moisture—especially if it was exposed to rain.
• Choose a clean, dry, and temperature-controlled location for charging (ideally between 50°F and 86°F / 10°C and 30°C).

Avoid charging in direct sunlight, near heaters, or in freezing conditions, as extreme temperatures can damage the battery.

Step 6: Connect the Charging Cable

Now, plug in your Eufy doorbell for charging.

• Insert the USB cable into the charging port on the back or bottom of the doorbell.
• Connect the other end to a 5V/2A USB power adapter.
• Plug the adapter into a wall outlet.

You should see a small LED light on the doorbell turn on—usually red or orange—indicating that charging has begun.

Tip: Use the original cable and adapter if possible. Third-party cables may not deliver consistent power and could slow charging or damage the battery.

Step 7: Monitor Charging Progress

Charging time varies by model and battery capacity, but most Eufy doorbells take 4 to 8 hours to fully charge.

• Check the LED light: It typically turns from red/orange to green or blue when fully charged.
• Use the Eufy app: Open the app and check the battery percentage. It will update in real time as the battery charges.

For example, the Eufy Video Doorbell E10 has a 5,200mAh battery and takes about 6 hours to charge from 0% to 100%.

Avoid unplugging the doorbell too early. A full charge ensures maximum runtime and battery health.

Step 8: Disconnect and Inspect

Once the battery is fully charged, it’s time to disconnect and prepare for reinstallation.

• Unplug the USB cable from the doorbell.
• Check the charging port again to ensure no moisture or debris remains.
• Wipe the doorbell with a dry, soft cloth to remove fingerprints or smudges.

Now your Eufy doorbell is ready to go back on the wall.

Step 9: Reconnect Wires (If Hardwired)

If your doorbell was connected to existing wiring, reconnect the wires before mounting.

• Twist the wire connectors back together securely.
• Tuck the wires neatly into the wall to prevent pinching.
• Ensure no bare wire is exposed.

Double-check that the connections are tight to avoid power issues later.

Step 10: Reattach the Doorbell to the Mount

Now, reinstall your Eufy doorbell.

• Align the doorbell with the mounting bracket.
• Slide it upward into place until it clicks.
• Reinsert and tighten the security screw at the bottom.

Make sure the doorbell is firmly attached and doesn’t wobble. A loose mount can affect video quality and motion detection.

Step 11: Test the Doorbell

After reinstallation, test your doorbell to ensure everything is working correctly.

• Open the Eufy app and check the live view.
• Verify that the battery percentage shows as full (100%).
• Test motion detection by walking in front of the doorbell.
• Try two-way audio by speaking through the app.

If everything works, you’re all set! If not, see the troubleshooting section below.

Step 12: Re-enable Motion Detection

Don’t forget to turn motion detection back on in the Eufy app.

• Go to your doorbell’s settings.
• Toggle Motion Detection back on.
• Adjust sensitivity and zones if needed.

Your Eufy doorbell is now fully charged and ready to protect your home.

Tips to Extend Your Eufy Doorbell Battery Life

Charging your doorbell is important, but so is maintaining battery health. Follow these tips to get the most out of your Eufy doorbell battery:

• Charge regularly: Don’t wait until the battery is completely dead. Charge every 2–6 months based on usage.
• Avoid extreme temperatures: Don’t leave the doorbell in direct sunlight or freezing conditions for long periods.
• Reduce unnecessary alerts: Adjust motion zones and sensitivity to avoid false triggers from trees, cars, or pets.
• Use scheduled modes: Set “Home” or “Away” modes in the app to limit recording when you don’t need it.
• Keep firmware updated: Eufy regularly releases updates that improve battery efficiency and performance.
• Avoid overcharging: While modern lithium-ion batteries have safeguards, it’s best to unplug once fully charged.

By following these habits, you can extend your battery’s lifespan and reduce how often you need to charge.

Troubleshooting Common Charging Issues

Sometimes, your Eufy doorbell may not charge as expected. Here’s how to fix the most common problems:

The Doorbell Won’t Charge

• Check the cable and adapter: Try a different USB cable or power source. Faulty cables are a common cause.
• Clean the charging port: Dust or lint can block the connection. Use a toothbrush or compressed air.
• Try a different outlet: Test the charger in another wall socket to rule out power issues.
• Reset the doorbell: Hold the reset button (usually on the back) for 10 seconds, then try charging again.

Battery Drains Too Fast

• Review motion settings: High sensitivity or large motion zones can drain the battery quickly.
• Check for firmware updates: Outdated software can cause inefficiencies.
• Inspect Wi-Fi signal: A weak connection forces the doorbell to work harder, using more power.
• Consider hardwiring: If battery life is a constant issue, upgrading to a hardwired model (like the Eufy Wired Doorbell) may be a better option.

LED Light Doesn’t Turn On

• Ensure the cable is fully inserted: Sometimes the connection looks secure but isn’t.
• Test the cable with another device: Confirm it’s working.
• Try a different adapter: Some adapters don’t provide enough power.
• Contact Eufy support: If the LED still doesn’t light up, the battery or charging circuit may be faulty.

Doorbell Won’t Reconnect to Wi-Fi After Charging

• Restart your router: Power cycle your Wi-Fi to refresh the connection.
• Re-pair the doorbell: Use the Eufy app to reconnect the device to your network.
• Check for interference: Move the doorbell closer to the router temporarily during setup.

If problems persist, visit the Eufy support website or contact customer service for assistance.

Conclusion

Charging your Eufy doorbell camera battery doesn’t have to be complicated. With the right tools, a little patience, and this step-by-step guide, you can keep your smart doorbell running smoothly and reliably. From checking the battery level to safely removing, charging, and reinstalling the device, every step matters for performance and safety.

Remember to charge regularly, use quality accessories, and follow best practices to extend your battery’s life. And if you run into issues, don’t panic—most problems have simple fixes.

Now that you know how to charge your Eufy doorbell camera battery like a pro, you can enjoy peace of mind knowing your home is always under watch—even when the battery’s running low.