How to Clean Eufy Vacuum

Keeping your Eufy vacuum clean ensures peak suction power, longer battery life, and a healthier home. This guide walks you through every cleaning step—from emptying the dustbin to maintaining filters and brushes—so your robot stays efficient and odor-free.

Key Takeaways

• Empty the dustbin after every use to prevent clogs and maintain strong suction.
• Clean or replace filters monthly to trap dust and allergens effectively.
• Remove hair and debris from the brush roll weekly to avoid motor strain and tangling.
• Wipe sensors and charging contacts regularly to ensure accurate navigation and reliable docking.
• Use only water and mild soap—never submerge electronic parts or use harsh chemicals.
• Store your Eufy in a dry, cool place when not in use to extend its lifespan.
• Follow the user manual for model-specific instructions to avoid accidental damage.

How to Clean Eufy Vacuum: A Complete Step-by-Step Guide

Keeping your Eufy vacuum clean isn’t just about appearances—it’s essential for performance, longevity, and hygiene. Over time, dust, hair, and debris build up in critical components like the dustbin, filters, and brush roll. If left unchecked, this buildup can reduce suction power, cause unpleasant odors, and even damage the motor. Fortunately, cleaning your Eufy vacuum is simple, quick, and only requires a few basic tools.

In this comprehensive guide, you’ll learn exactly how to clean every part of your Eufy vacuum—whether you own a RoboVac, RoboVac G30, RoboVac L35, or another model. We’ll walk you through each step, share practical tips to make maintenance easier, and explain how often you should perform each task. By the end, you’ll have a spotless, high-performing robot vacuum that keeps your floors clean without hassle.

Let’s get started!

Why Cleaning Your Eufy Vacuum Matters

Before diving into the cleaning process, it’s important to understand why regular maintenance is crucial. Eufy vacuums are designed to automate cleaning, but they still rely on mechanical parts that wear down over time. Dust and debris can clog airflow, reduce battery efficiency, and even cause overheating. A dirty filter, for example, forces the motor to work harder, shortening its lifespan.

Additionally, a neglected vacuum can become a breeding ground for bacteria and mold—especially if you have pets or live in a humid environment. This not only leads to bad smells but can also worsen allergies. Regular cleaning ensures your Eufy continues to capture allergens instead of releasing them back into the air.

Finally, a well-maintained vacuum simply works better. You’ll notice stronger suction, quieter operation, and more accurate navigation. Think of cleaning your Eufy like changing the oil in your car—it’s a small effort that pays big dividends.

What You’ll Need to Clean Your Eufy Vacuum

You don’t need fancy tools or expensive cleaning products to maintain your Eufy vacuum. Most items are likely already in your home. Here’s a quick checklist:

• A soft, dry cloth or microfiber towel
• A small brush (like an old toothbrush or cleaning brush)
• Scissors or a seam ripper (for cutting tangled hair)
• Mild dish soap
• Warm water
• A clean, dry towel for drying
• Compressed air (optional, for hard-to-reach areas)

Avoid using bleach, ammonia, or abrasive cleaners—these can damage plastic parts and rubber seals. Never submerge the main body, motor, or electronic components in water. Always unplug the vacuum or remove the battery (if applicable) before cleaning.

Step 1: Power Off and Prepare Your Vacuum

Before you begin, make sure your Eufy vacuum is completely powered off. If it’s a cordless model, remove the battery if possible. For robot vacuums, press the power button to turn it off and disconnect it from the charging dock.

Place your vacuum on a flat, stable surface—like a table or countertop—so you can easily access all parts. Lay down a towel or paper towels to catch any dust or debris that falls out during cleaning.

This step may seem obvious, but it’s essential for safety and efficiency. Working on a powered-on vacuum can lead to accidental activation, especially with robot models that may start cleaning if bumped.

Step 2: Empty the Dustbin

The dustbin is the first thing you should clean—and it should be emptied after every use. A full or clogged dustbin reduces suction and forces the motor to work harder.

How to Remove the Dustbin

Most Eufy vacuums have a front-loading dustbin. Press the release button (usually located on the top or side) and gently pull the bin straight out. Some models, like the RoboVac 11S, have a top-mounted bin that lifts out with a handle.

Emptying the Contents

Hold the dustbin over a trash can and press the release latch to open the bottom lid. Tap it gently to dislodge any stuck debris. For stubborn dirt, use a soft brush to loosen it.

Avoid shaking the bin too hard—this can send dust back into the air. If you’re sensitive to allergens, consider wearing a mask or emptying the bin outdoors.

Cleaning the Dustbin

Once emptied, rinse the dustbin with warm water. Add a drop of mild dish soap if needed. Use a soft brush to scrub the inside, especially around the edges and filter housing. Rinse thoroughly to remove all soap residue.

Let the dustbin air dry completely before reinserting it. Never reassemble a wet dustbin—moisture can promote mold growth and damage internal components.

Step 3: Clean or Replace the Filters

Filters are critical for trapping fine dust, pollen, and pet dander. Over time, they become clogged and lose effectiveness. Cleaning or replacing them regularly ensures your Eufy continues to improve indoor air quality.

Locating the Filter

The filter is usually housed inside the dustbin. Remove the dustbin, then look for a removable filter compartment—often a small mesh or foam piece at the top or bottom of the bin.

On some models, like the RoboVac G30, the filter is a HEPA-style unit that slides out from the side. Refer to your user manual if you’re unsure.

Cleaning Reusable Filters

Most Eufy vacuums come with washable filters. Tap the filter gently to remove loose dust, then rinse it under lukewarm water. Avoid hot water—it can warp the material.

Use your fingers or a soft brush to gently scrub the surface. Do not wring or twist the filter, as this can damage the fibers.

Let the filter air dry for at least 24 hours. Never reinstall a damp filter—this can cause mold and reduce performance.

Replacing Disposable Filters

Some models use disposable filters that cannot be washed. Check your user manual to confirm. If your filter is disposable, replace it every 2–3 months or when it appears dirty or discolored.

To replace, simply remove the old filter and insert a new one. Make sure it’s seated properly and the seal is intact.

Filter Maintenance Tips

• Clean reusable filters every 2–4 weeks, depending on usage.
• Replace disposable filters every 2–3 months.
• Keep spare filters on hand so you’re never without a clean one.
• Write the installation date on new filters with a permanent marker to track usage.

Step 4: Clean the Brush Roll and Side Brushes

The brush roll (also called the main brush or roller brush) picks up dirt, hair, and debris from carpets and hard floors. The side brushes sweep debris toward the suction inlet. Both can become tangled with hair and string, reducing efficiency.

Removing the Brush Roll

Flip your Eufy vacuum over so the underside is facing up. Locate the brush roll cover—usually held in place by clips or screws. On most models, you can remove it by pressing the release tabs and lifting the cover.

Once the cover is off, gently pull the brush roll out. It should slide out easily from its housing.

Cleaning the Brush Roll

Use scissors or a seam ripper to cut through tangled hair wrapped around the brush. Pull the hair away carefully to avoid damaging the bristles.

Wipe the brush roll with a damp cloth to remove dust and debris. For stubborn grime, use a soft brush and mild soap. Rinse and let it dry completely.

Inspect the brush bearings and housing for dirt. Use a dry brush or compressed air to clean these areas.

Cleaning the Side Brushes

The side brushes are small, rotating brushes on the front corners of the vacuum. They’re usually held in place by a screw.

Use a screwdriver to remove the screw, then lift off the brush. Clean off any hair or debris wrapped around the base.

Wipe the brush with a damp cloth. If the bristles are bent or damaged, replace the side brush—they’re inexpensive and easy to find online.

Reinstalling the Brushes

Once everything is dry, reinsert the brush roll into its housing. Make sure it spins freely. Replace the cover and secure it with clips or screws.

Reattach the side brushes and tighten the screws. Test the rotation by spinning them gently with your finger.

Step 5: Clean the Sensors and Charging Contacts

Eufy vacuums rely on sensors to navigate, avoid obstacles, and return to the charging dock. Dirty sensors can cause erratic behavior, missed spots, or docking failures.

Locating the Sensors

Common sensor locations include:

• Bumper sensors: Around the front edge of the vacuum.
• Cliff sensors: On the underside, near the wheels.
• Camera or laser sensors: On the top or front (on advanced models like the RoboVac X8).
• Charging contacts: Metal pads on the bottom that connect to the dock.

Cleaning the Sensors

Use a soft, dry cloth to gently wipe each sensor. For stubborn dirt, lightly dampen the cloth with water—never spray liquid directly onto the vacuum.

Avoid using alcohol or cleaning sprays near sensors, as they can leave residues that interfere with readings.

For camera lenses, use a microfiber cloth in a circular motion to avoid scratching.

Cleaning the Charging Contacts

The charging contacts are metal pads that transfer power from the dock to the vacuum. Dust or debris here can prevent proper charging.

Wipe the contacts with a dry cloth. If there’s corrosion or buildup, use a cotton swab lightly dampened with isopropyl alcohol. Let it dry completely before docking.

Step 6: Clean the Wheels and Wheel Housings

Wheels allow your Eufy to move smoothly across floors. Over time, hair, string, and dirt can wrap around the axles, causing the wheels to stick or make noise.

Removing the Wheels

Most Eufy vacuums have removable wheels. Gently pull the main wheels outward—they usually pop out with a bit of pressure. Side wheels may require unscrewing.

Cleaning the Wheels

Use scissors to cut away any hair wrapped around the axle. Wipe the wheel and housing with a damp cloth.

Check the wheel bearings for smooth rotation. If they feel gritty or stiff, clean them with a dry brush.

Reinstalling the Wheels

Push the wheels back into place until they click. Test rotation by spinning them manually.

Step 7: Wipe Down the Exterior

A quick wipe-down keeps your Eufy looking new and prevents dust from entering internal components.

Use a soft, slightly damp cloth to clean the top, sides, and bottom of the vacuum. Pay attention to crevices where dust accumulates.

Avoid getting water near buttons, vents, or the charging port. Dry with a clean towel afterward.

For stubborn stains, use a cloth with a drop of mild soap. Never use abrasive pads or harsh chemicals.

Step 8: Clean the Charging Dock

The charging dock also needs occasional cleaning to ensure reliable charging.

Unplug the dock from the power outlet. Wipe the surface with a dry cloth.

Clean the charging pins on the dock with a cotton swab and isopropyl alcohol. Let it dry completely before plugging it back in.

Remove any dust or debris from the dock’s interior, especially if your vacuum stores debris there (like on some RoboVac models).

How Often Should You Clean Your Eufy Vacuum?

Cleaning frequency depends on usage, but here’s a general schedule:

• After every use: Empty the dustbin.
• Weekly: Clean the brush roll and side brushes.
• Every 2–4 weeks: Wash reusable filters, clean sensors and wheels.
• Every 2–3 months: Replace disposable filters, deep-clean the dock.
• As needed: Wipe exterior, check for damage.

If you have pets, allergies, or high foot traffic, clean more frequently.

Troubleshooting Common Cleaning Issues

Even with regular maintenance, you might run into problems. Here’s how to fix common issues:

Vacuum Won’t Turn On After Cleaning

Make sure all parts are fully dry and properly reassembled. Check that the battery is charged and the power button is pressed firmly.

Reduced Suction Power

This is usually caused by a clogged filter or full dustbin. Clean or replace the filter and empty the bin. Check the brush roll for blockages.

Vacuum Not Docking Properly

Clean the charging contacts and sensors. Ensure the dock is on a flat, unobstructed surface. Remove any objects blocking the path.

Unusual Noises

Grinding or squeaking often means the brush roll or wheels are tangled. Remove and clean them thoroughly.

Bad Odors

Clean the dustbin and filter. Wipe the interior with a cloth dampened with vinegar (diluted 1:1 with water) to neutralize smells. Let it dry completely.

Tips for Long-Term Maintenance

• Store your Eufy in a cool, dry place away from direct sunlight.
• Keep spare filters and brushes on hand.
• Update the firmware regularly (for smart models) to improve performance.
• Avoid vacuuming liquids, sharp objects, or large debris.
• Use boundary strips or no-go zones to protect delicate areas.

Conclusion

Cleaning your Eufy vacuum doesn’t have to be a chore. With just a few minutes of maintenance each week, you can keep your robot running like new. From emptying the dustbin to cleaning filters and brushes, each step plays a vital role in performance and longevity.

By following this guide, you’ll enjoy stronger suction, quieter operation, and a healthier home. Plus, you’ll extend the life of your investment—saving money and reducing waste.

Remember: a clean vacuum is a happy vacuum. So grab your cloth and brush, and give your Eufy the care it deserves. Your floors—and your lungs—will thank you.