How to Add Water to Eufy L60

Adding water to your Eufy L60 robot vacuum is simple but essential for mopping performance. This guide walks you through the process clearly, safely, and efficiently—ensuring your device works at its best every time.

Key Takeaways

• Always use clean, cool tap water or distilled water: Avoid hot water, vinegar, or cleaning solutions to prevent damage to internal components.
• Fill the water tank before each mopping session: The Eufy L60 has a built-in water tank that must be refilled manually for every clean.
• Check the water tank for cracks or leaks: Inspect regularly to avoid water damage to your floors or the robot.
• Attach the mopping pad correctly: A properly secured pad ensures even water distribution and effective cleaning.
• Clean the water tank after use: Rinse and dry the tank to prevent mold, bacteria, or mineral buildup.
• Store the robot upright when not in use: Prevents accidental water leakage and extends pad life.
• Follow the user manual for model-specific guidance: The Eufy L60 has unique design features—always refer to official instructions.

How to Add Water to Eufy L60: A Complete Step-by-Step Guide

If you’ve recently purchased the Eufy L60 robot vacuum, you’re probably excited about its dual functionality—vacuuming and mopping. But to get the most out of its mopping feature, you need to know how to properly add water to the Eufy L60. It’s a simple process, but doing it incorrectly can lead to poor cleaning performance, water leaks, or even damage to your floors or the robot itself.

In this comprehensive guide, we’ll walk you through every step of adding water to your Eufy L60, from preparing the water tank to attaching the mopping pad and troubleshooting common issues. Whether you’re a first-time user or just need a refresher, this guide ensures you’ll master the process quickly and confidently.

By the end of this article, you’ll know exactly how to safely and effectively add water to your Eufy L60, maintain its components, and keep your floors spotless with every clean.

What You’ll Need

Before we begin, make sure you have the following items ready:

• Clean, cool tap water or distilled water
• A clean cloth or paper towel
• The Eufy L60 robot vacuum
• The removable water tank (included with the robot)
• A clean mopping pad (also included)
• A flat, stable surface (like a table or countertop)

Avoid using hot water, bleach, vinegar, or any cleaning solutions unless specifically recommended by Eufy. These can damage the water tank, clog the water distribution system, or leave harmful residues on your floors.

Step 1: Power Off the Eufy L60

Safety first! Always turn off your Eufy L60 before adding water or performing any maintenance.

How to Power Off

Press and hold the power button on the top of the robot for about 3 seconds until the device shuts down completely. You’ll hear a beep and see the lights turn off. This prevents accidental activation while you’re handling the water tank.

Why It’s Important

Turning off the robot ensures that no electrical components are active during the water-filling process. This reduces the risk of short circuits or water damage to internal sensors.

Step 2: Locate and Remove the Water Tank

The Eufy L60 has a built-in water tank located at the bottom rear of the robot. It’s designed to hold enough water for a standard mopping session.

Finding the Water Tank

Flip the robot upside down so the bottom panel is facing up. You’ll see a rectangular compartment near the back wheels. This is the water tank housing.

Removing the Tank

Gently pull the water tank straight out from its slot. It should slide out easily with a slight tug. If it feels stuck, wiggle it slightly while pulling—don’t force it, as this could damage the clips.

Inspect the Tank

Before filling, check the water tank for any cracks, warping, or residue. A damaged tank can leak water onto your floors or inside the robot, causing malfunctions. If you notice any issues, contact Eufy support for a replacement.

Step 3: Fill the Water Tank with Water

Now it’s time to add water to the Eufy L60. This step is crucial for effective mopping.

Choose the Right Water

Use clean, cool tap water or distilled water. Distilled water is ideal if you live in an area with hard water, as it prevents mineral buildup in the tank and water distribution system.

Avoid These Liquids

• Hot water: Can warp the plastic tank or damage internal components.
• Vinegar or cleaning solutions: May corrode parts or leave strong odors.
• Bleach or ammonia-based cleaners: Highly corrosive and unsafe for the robot.
• Essential oils: Can clog the water nozzle and leave sticky residues.

Filling the Tank

Hold the water tank upright and remove the rubber cap from the fill hole. Pour water slowly into the opening until it reaches the “Max” line marked inside the tank. Do not overfill—excess water can leak during operation.

Secure the Cap

Once filled, firmly reattach the rubber cap. Make sure it’s sealed tightly to prevent leaks. Shake the tank gently to test for leaks before reinserting it into the robot.

Step 4: Reinsert the Water Tank into the Robot

With the tank filled and sealed, it’s time to put it back into the Eufy L60.

Align the Tank Properly

Slide the water tank back into its slot at the bottom of the robot. Make sure it’s fully seated and clicks into place. The tank should sit flush with the robot’s base.

Check for Proper Fit

Gently press down on the tank to ensure it’s secure. If it wobbles or feels loose, remove it and reinsert it carefully. A loose tank can cause water to drip during cleaning.

Step 5: Attach the Mopping Pad

The mopping pad is essential for absorbing and distributing water evenly across your floors.

Choose the Right Pad

The Eufy L60 comes with reusable microfiber mopping pads. Make sure the pad is clean and dry before use. If it’s dirty, wash it with mild detergent and let it air dry completely.

Attach the Pad Correctly

Place the mopping pad on the bottom of the robot, aligning it with the Velcro strips on the water tank. Press down firmly to secure it. The pad should cover the entire mopping area and not hang loose.

Ensure Even Coverage

A properly attached pad ensures that water is distributed evenly. If the pad is crooked or too small, some areas may remain dry while others get too wet.

Step 6: Power On and Start Mopping

Now that everything is set up, you’re ready to start cleaning.

Turn On the Robot

Place the Eufy L60 on the floor and press the power button. Wait for it to initialize—this usually takes 10–15 seconds.

Select Mopping Mode

Use the Eufy app or the physical buttons on the robot to select “Mop Only” or “Vacuum + Mop” mode, depending on your preference. The robot will begin moving and releasing water onto the pad.

Monitor the First Run

Watch the robot during its first few minutes of operation. Check for leaks, uneven water distribution, or unusual noises. If everything looks good, let it continue cleaning.

Tips for Optimal Water Usage

To get the best results from your Eufy L60, follow these practical tips:

• Adjust water flow in the app: The Eufy app allows you to choose between low, medium, and high water flow settings. Use low for delicate floors and high for heavily soiled areas.
• Clean small areas at a time: The water tank holds about 200ml, which is enough for 30–40 square meters. For larger homes, refill as needed.
• Use on hard floors only: The Eufy L60 is designed for tile, hardwood, laminate, and vinyl. Avoid using it on carpets or rugs, as water can damage them.
• Empty the tank after use: If you’re not using the robot for a few days, empty the water tank to prevent stagnation.

Maintaining the Water Tank and Mopping System

Regular maintenance keeps your Eufy L60 running smoothly and prevents long-term issues.

Clean the Water Tank Weekly

Remove the tank and rinse it thoroughly with clean water. Use a soft brush to scrub the inside if needed. Let it air dry completely before refilling.

Check the Water Nozzle

The small nozzle that releases water onto the pad can get clogged with mineral deposits. Use a toothpick or needle to gently clear any blockages.

Wash the Mopping Pad After Each Use

Remove the pad and machine wash it with mild detergent. Avoid fabric softeners, as they reduce absorbency. Air dry only—do not use a dryer.

Inspect for Leaks Monthly

Place the robot on a dry paper towel and run it for a few minutes. If the towel gets wet in unexpected areas, there may be a leak in the tank or hose.

Troubleshooting Common Issues

Even with proper care, you might encounter some problems. Here’s how to fix them:

Water Not Dispensing

• Check if the water tank is empty or not properly inserted.
• Ensure the water flow setting is not set to “Off” in the app.
• Clean the water nozzle with a toothpick.
• Make sure the mopping pad is attached and not too thick.

Water Leaking During Use

• Verify the rubber cap is tightly sealed.
• Check for cracks in the water tank.
• Ensure the robot is on a flat surface—tilting can cause leaks.
• Do not overfill the tank.

Mopping Pad Not Getting Wet

• Confirm the water tank has enough water.
• Check that the pad is clean and not saturated from previous use.
• Ensure the water distribution holes are not blocked.

Robot Stops Mid-Clean

• This could be due to low battery or a full dustbin. Charge the robot and empty the bin.
• If the water tank is empty, the robot may pause mopping but continue vacuuming.

Safety Precautions

When adding water to your Eufy L60, keep these safety tips in mind:

• Never submerge the robot in water.
• Do not use the robot on wet floors unless it’s part of the cleaning cycle.
• Keep the robot away from children and pets during operation.
• Unplug the charging dock before cleaning or maintenance.
• Store the robot in a dry, cool place when not in use.

Conclusion

Adding water to your Eufy L60 is a straightforward process that ensures your robot vacuum delivers powerful mopping performance. By following the steps in this guide—powering off the robot, filling the tank with clean water, reinserting it securely, and attaching a clean mopping pad—you’ll keep your floors clean and your device in top condition.

Remember to maintain the water tank and mopping system regularly, avoid using harsh chemicals, and troubleshoot issues promptly. With proper care, your Eufy L60 will provide reliable cleaning for years to come.

Now that you know how to add water to Eufy L60, you’re ready to enjoy spotless floors with minimal effort. Happy cleaning!