How to Change Chime on Eufy Doorbell

This guide walks you through how to change the chime on your Eufy doorbell, whether you’re using the built-in chime, a physical chime unit, or the Eufy app. You’ll learn how to adjust volume, select tones, and troubleshoot common issues.

Key Takeaways

• Use the Eufy Security app to access chime settings and customize your doorbell sound directly from your phone.
• Choose from multiple chime tones to match your preference, from classic doorbell sounds to modern melodies.
• Adjust chime volume to suit your home environment—quieter for apartments, louder for larger spaces.
• Sync with physical chime units if you have a wired Eufy doorbell and want traditional indoor ringing.
• Enable or disable chimes for specific times using scheduling features in the app.
• Troubleshoot sync issues by checking Wi-Fi, power supply, and app updates if your chime isn’t working.
• Test your new chime after changes to ensure it’s working properly and audible in key areas of your home.

Introduction: Why Customizing Your Eufy Doorbell Chime Matters

Your Eufy doorbell does more than just show you who’s at the door—it alerts you with a chime when someone presses the button or triggers motion detection. But not all chimes are created equal. The default sound might be too quiet, too harsh, or just not your style. That’s why learning how to change the chime on your Eufy doorbell is a smart move.

Whether you’ve just installed your Eufy doorbell or you’ve had it for a while and want a refresh, customizing the chime can improve your experience. Maybe you want a softer tone for nighttime, a louder alert for a busy household, or a fun melody that matches your personality. With the Eufy Security app, you have full control over your doorbell’s sound.

In this guide, we’ll walk you through every step of changing your Eufy doorbell chime. You’ll learn how to use the app, adjust volume, pick different tones, sync with physical chimes, and even set schedules. We’ll also cover troubleshooting tips in case something doesn’t work as expected. By the end, you’ll have a doorbell that not only keeps you safe but also sounds just the way you like it.

Understanding Your Eufy Doorbell Chime Options

Before diving into the steps, it’s important to understand the different ways your Eufy doorbell can chime. Eufy offers both wireless and wired doorbell models, and each supports different chime options.

Built-In Chime (Wireless Models)

Most wireless Eufy doorbells, like the Eufy Video Doorbell 2K or the Eufy SoloCam Doorbell, have a built-in speaker that plays a chime when the button is pressed. This chime plays directly from the doorbell unit itself. It’s convenient because you don’t need extra hardware, but the sound may not carry far inside your home.

Physical Chime Unit (Wired Models)

If you have a wired Eufy doorbell, such as the Eufy Video Doorbell Wired, it can connect to a traditional mechanical or digital chime inside your home. This is the same kind of chime that comes with standard doorbells. When someone presses the button, the doorbell sends a signal to the chime unit, which rings loudly through your house.

App-Based Chime (All Models)

All Eufy doorbells send notifications to the Eufy Security app on your smartphone or tablet. These push notifications act as a digital chime. You can customize the sound of these alerts, adjust volume, and even set silent modes. This is especially useful if you’re in a different room or wearing headphones.

Smart Home Integration

Eufy doorbells can also integrate with smart home systems like Amazon Alexa or Google Assistant. You can set up routines so that when the doorbell is pressed, your Echo device plays a custom sound or announces “Someone is at the front door.” This adds another layer of customization.

Understanding these options helps you decide which chime method to prioritize. Most users combine multiple methods—like using the app for notifications and a physical chime for loud indoor alerts—to get the best of both worlds.

How to Change the Chime Using the Eufy Security App

The Eufy Security app is your central hub for managing your doorbell, including chime settings. Whether you’re changing the tone, adjusting volume, or setting schedules, the app makes it simple. Here’s how to do it step by step.

Step 1: Open the Eufy Security App

Start by opening the Eufy Security app on your smartphone or tablet. Make sure you’re logged into the account linked to your doorbell. If you haven’t installed the app yet, download it from the Apple App Store or Google Play Store.

Once opened, you’ll see a home screen with your connected devices. Look for your doorbell—it should appear as a tile with a live preview or a still image.

Step 2: Select Your Doorbell Device

Tap on the doorbell tile to open its control panel. This will bring up options like live view, recordings, motion detection settings, and more. Look for a gear icon or “Settings” button—usually in the top-right corner—and tap it.

Step 3: Navigate to Chime Settings

In the settings menu, scroll down until you find a section labeled “Chime” or “Doorbell Chime.” The exact wording may vary slightly depending on your doorbell model and app version.

Tap on this option to open the chime customization menu.

Step 4: Choose a Chime Tone

Here’s where the fun begins. Eufy offers a variety of chime tones to choose from. You’ll see a list of options like:

– Classic Ding-Dong
– Modern Beep
– Melodic Chime
– Gentle Chime
– Fun Tones (e.g., “Happy Birthday,” “Jingle Bells”)

Tap on any tone to preview it. Most models allow you to hear a sample before selecting. Once you find one you like, tap “Save” or “Apply.”

Pro Tip: If you have kids or pets, consider a softer tone to avoid startling them. For larger homes, a louder or more distinct tone might be better.

Step 5: Adjust Chime Volume

Next to the tone selection, you’ll usually find a volume slider. Drag it left to make the chime quieter or right to make it louder. The volume range typically goes from 0 (off) to 10 (maximum).

Test the volume by pressing the doorbell button (or using the “Test Chime” button in the app if available). Walk around your home to make sure the sound is audible in key areas like the kitchen, bedroom, or backyard.

Step 6: Enable or Disable Chime

You can also toggle the chime on or off. This is useful if you want to silence the doorbell during nap time or late at night. Simply switch the toggle to “Off” if you don’t want any sound.

Note: Even if the chime is off, you’ll still receive push notifications on your phone unless you disable those separately.

Step 7: Save Your Changes

After making your selections, don’t forget to tap “Save” or “Apply” at the bottom of the screen. The app will sync the new settings with your doorbell. This usually takes a few seconds.

How to Set Up a Physical Chime for Wired Eufy Doorbells

If you have a wired Eufy doorbell, you can connect it to a traditional indoor chime unit. This gives you that classic doorbell ring throughout your home. Here’s how to set it up.

Step 1: Turn Off Power to Your Doorbell

Safety first! Before working with wiring, turn off the power to your doorbell at the circuit breaker. Use a voltage tester to confirm the power is off.

Step 2: Install the Chime Unit

If you don’t already have a chime unit, install one in a central location, like a hallway or living room. Most chime units come with mounting hardware and instructions.

Connect the wires from your doorbell transformer to the chime unit’s “Front” terminals. Then, connect the wires from the doorbell to the same terminals. The exact wiring may vary, so refer to your chime unit’s manual.

Step 3: Connect the Doorbell

Mount your Eufy wired doorbell to the wall and connect the wires to the back of the unit. Secure it with the provided screws.

Step 4: Restore Power and Test

Turn the power back on at the circuit breaker. Press the doorbell button to test the chime. You should hear a loud, clear ring from the indoor unit.

Step 5: Sync with the Eufy App

Open the Eufy Security app and go to your doorbell settings. Look for “Chime Settings” and make sure the physical chime is enabled. You can still customize the tone and volume through the app, even when using a physical chime.

Note: Some older chime units may not be compatible with digital doorbells. If your chime doesn’t work, you may need a digital-compatible chime or a chime module from Eufy.

How to Customize App Notifications as a Digital Chime

Even if your doorbell doesn’t have a loud built-in chime or physical unit, the app notifications can act as your primary alert. Here’s how to make the most of them.

Step 1: Open Notification Settings

In the Eufy Security app, go to your doorbell settings and look for “Notifications” or “Alerts.”

Step 2: Choose Notification Sound

Tap on “Sound” or “Notification Tone.” You’ll see a list of sounds you can choose from. These are the same tones available for the doorbell chime, but they play on your phone.

Select a tone that’s easy to hear but not too disruptive. For example, “Gentle Chime” works well for nighttime.

Step 3: Adjust Volume and Vibration

Make sure your phone’s volume is up and notifications are allowed for the Eufy app. You can also enable vibration for extra alertness.

Step 4: Set Notification Schedule

Use the “Schedule” feature to control when you receive alerts. For example, you can silence notifications from 10 PM to 7 AM, or only allow alerts when you’re away from home.

This is especially helpful if you have motion detection enabled and don’t want to be alerted every time a car drives by.

How to Use Smart Home Integration for Custom Chimes

Take your chime customization to the next level by integrating your Eufy doorbell with Alexa or Google Assistant.

Step 1: Link Eufy to Alexa or Google

Open the Alexa or Google Home app and search for the Eufy skill. Follow the prompts to link your Eufy account.

Step 2: Create a Routine

In the Alexa app, go to “Routines” and create a new one. Set the trigger to “When doorbell is pressed.”

For the action, choose “Play sound” or “Announce.” You can select a custom sound or have Alexa say, “Someone is at the front door.”

Step 3: Test the Integration

Press your doorbell button and listen for the announcement on your Echo device. Adjust the volume or message as needed.

This setup is great for large homes or if you’re often in the basement or backyard where the doorbell sound doesn’t carry.

Troubleshooting Common Chime Issues

Sometimes, your chime might not work as expected. Here are common problems and how to fix them.

Chime Not Playing

– Check that the chime is enabled in the app.
– Ensure your doorbell has power (battery level or wired connection).
– Restart the doorbell by removing and reinserting the battery or cycling the power.

Weak or Distorted Sound

– Clean the doorbell speaker with a soft, dry cloth.
– Move the doorbell away from metal surfaces that can block sound.
– Increase the volume in the app.

Physical Chime Not Ringing

– Verify wiring connections at the chime unit and doorbell.
– Test the chime with another doorbell if possible.
– Replace the chime unit if it’s old or incompatible.

App Notifications Not Working

– Check that notifications are allowed for the Eufy app in your phone settings.
– Make sure your phone isn’t in Do Not Disturb mode.
– Reinstall the app if issues persist.

Delayed Chime

– Weak Wi-Fi can cause delays. Move your router closer or use a Wi-Fi extender.
– Update the Eufy app and doorbell firmware.

Tips for Getting the Best Chime Experience

– Test in different rooms: After changing settings, walk around your home to ensure the chime is audible everywhere.
– Use multiple alerts: Combine app notifications, physical chime, and smart speaker alerts for maximum coverage.
– Update regularly: Eufy often releases firmware updates that improve sound quality and add new tones.
– Involve the family: Let everyone choose their favorite tone—kids especially love fun sounds like “Jingle Bells” during the holidays.

Conclusion: Make Your Doorbell Sound Uniquely Yours

Changing the chime on your Eufy doorbell is a simple but powerful way to personalize your smart home experience. Whether you prefer a classic ring, a modern beep, or a festive melody, the Eufy Security app puts you in control. You can adjust volume, choose tones, set schedules, and even integrate with smart speakers for a fully customized alert system.

By following this guide, you’ve learned how to change the chime using the app, set up a physical chime, customize app notifications, and troubleshoot common issues. Now, your doorbell doesn’t just notify you—it speaks your language.

Take a moment to test your new settings and enjoy the peace of mind that comes with a doorbell that truly works for you. With the right chime, you’ll never miss a visitor again.