How to Charge a Eufy Doorbell Camera

Charging your Eufy doorbell camera is simple but requires the right steps to maintain battery life and performance. This guide walks you through every stage—from removing the device to recharging and reinstalling—with clear instructions and helpful tips.

Key Takeaways

• Know your model: Not all Eufy doorbells are battery-powered; some are hardwired. Only battery models need charging.
• Use the original USB cable and adapter: This ensures safe, fast charging and protects the battery from damage.
• Charge fully before reinstalling: A full charge (4–6 hours) gives you 3–6 months of use, depending on activity.
• Remove the doorbell carefully: Use the included removal tool or a flathead screwdriver to avoid damaging the device or wall.
• Check the LED indicator: A solid red light means charging; green means fully charged.
• Clean the charging port: Dust or debris can block charging—gently wipe with a dry cloth.
• Reinstall securely: Make sure the doorbell clicks into place and the mounting bracket is tight to prevent tampering.

How to Charge a Eufy Doorbell Camera: A Complete Step-by-Step Guide

If you’ve recently installed a Eufy doorbell camera or noticed it’s running low on battery, you’re in the right place. Charging your Eufy doorbell camera might seem straightforward, but doing it correctly ensures long-term performance, safety, and reliability. Whether you’re a first-time user or just need a refresher, this guide will walk you through every step—from safely removing the device to recharging it and reinstalling it properly.

In this comprehensive how-to guide, you’ll learn how to charge a Eufy doorbell camera the right way, avoid common mistakes, and extend your device’s battery life. We’ll cover everything you need to know, including which models require charging, how long it takes, what tools you’ll need, and troubleshooting tips if something goes wrong. By the end, you’ll feel confident maintaining your smart doorbell so it’s always ready to protect your home.

Why Charging Your Eufy Doorbell Camera Matters

Eufy doorbell cameras are designed to provide 24/7 surveillance, motion detection, two-way audio, and real-time alerts—all powered by a rechargeable lithium-ion battery. Unlike traditional wired doorbells, battery-powered Eufy models offer easy installation without the need for electrical wiring. However, that convenience comes with the responsibility of regular charging.

Neglecting to charge your doorbell can lead to unexpected shutdowns, missed motion alerts, and gaps in your home security. A fully charged battery typically lasts between 3 to 6 months, depending on usage, climate, and settings like video quality or motion sensitivity. Charging your Eufy doorbell camera on time ensures uninterrupted protection and peace of mind.

Plus, proper charging habits—like using the right charger and avoiding overcharging—help extend the overall lifespan of the battery. Lithium-ion batteries degrade over time, but following best practices can slow that process and keep your doorbell running smoothly for years.

Which Eufy Doorbell Models Need Charging?

Before you start, it’s important to confirm whether your Eufy doorbell camera actually needs charging. Eufy offers both battery-powered and hardwired models, and only the battery versions require periodic recharging.

Battery-powered models include:

• Eufy Video Doorbell Dual (Battery)
• Eufy Video Doorbell Solo (Battery)
• Eufy Video Doorbell 2K (Battery)
• Eufy Video Doorbell 1080P (Battery)

These models come with a removable rechargeable battery and are ideal for homes without existing doorbell wiring or for renters who can’t modify electrical systems.

Hardwired models, such as the Eufy Video Doorbell Dual (Wired) or Eufy Video Doorbell 2K (Wired), connect directly to your home’s electrical system and do not require charging. They draw power from the existing doorbell wires, so you never have to worry about battery life.

If you’re unsure which model you have, check the packaging, your Eufy app, or the device itself. Battery models usually have a removable faceplate and a visible charging port on the back or bottom.

Tools and Materials You’ll Need

Charging your Eufy doorbell camera doesn’t require fancy equipment, but having the right tools makes the process faster and safer. Here’s what you’ll need:

• The original USB charging cable: Eufy includes a USB-C or Micro-USB cable (depending on the model) in the box. Always use this cable for best results.
• A compatible USB power adapter: The one that came with your Eufy doorbell is ideal. If you don’t have it, use a 5V/2A adapter from a trusted brand like Anker, Belkin, or Apple.
• The Eufy removal tool: This small metal key is included in the box and is designed to unlock the doorbell from its mounting bracket.
• A flathead screwdriver (optional): If you’ve misplaced the removal tool, a small flathead screwdriver can work in a pinch.
• A soft, dry cloth: For cleaning the charging port and device surface.
• A well-lit workspace: Good lighting helps you see small components and avoid mistakes.

Using non-original cables or low-quality adapters can lead to slow charging, overheating, or even damage to the battery. Stick to Eufy-recommended accessories whenever possible.

Step 1: Check the Battery Level

Before removing your doorbell, check the current battery level to confirm it needs charging. You can do this in two ways:

Via the Eufy Security App

Open the Eufy Security app on your smartphone or tablet. Tap on your doorbell device to view its status. The battery level is usually displayed as a percentage (e.g., 20%, 50%, 100%). If it’s below 20%, it’s time to charge.

Via the LED Indicator

Most Eufy doorbell cameras have an LED light that shows battery status. A blinking red light typically means low battery, while a solid red light indicates charging in progress. A solid green light means the battery is fully charged.

If your doorbell is still above 30% battery, you might not need to charge it yet. However, if you’re planning a vacation or won’t be home for a while, it’s a good idea to top it off.

Step 2: Safely Remove the Doorbell from the Wall

Now that you’ve confirmed the battery is low, it’s time to remove the doorbell from its mounting bracket. Follow these steps carefully to avoid damage.

Turn Off the Device (Optional but Recommended)

While not always necessary, turning off the doorbell before removal can prevent accidental activation or damage. In the Eufy app, go to Device Settings > Power and toggle it off. This step is especially helpful if you’re working near the door and don’t want false motion alerts.

Locate the Release Slot

Look at the bottom edge of the doorbell. You’ll see a small slot or hole—this is where the removal tool fits. On some models, it’s on the side or back, so check your user manual if you’re unsure.

Insert the Removal Tool

Take the metal removal tool (or a flathead screwdriver) and gently insert it into the slot. Apply slight upward pressure. You should feel the doorbell unlock from the bracket.

Lift the Doorbell Away

Once unlocked, carefully lift the doorbell straight up and away from the wall. Avoid pulling too hard—there’s no wire tether, but rough handling can damage the casing or internal components.

Place the doorbell on a soft surface, like a towel or table, to prevent scratches. Keep the mounting bracket in place—you’ll need it when reinstalling.

Step 3: Clean the Charging Port and Device

Before plugging in the charger, take a moment to clean the charging port and the doorbell’s surface. Dust, dirt, or moisture can interfere with charging or cause corrosion over time.

Inspect the Charging Port

Look inside the USB-C or Micro-USB port on the back or bottom of the doorbell. If you see debris, gently blow into the port or use a can of compressed air. Never use water or liquid cleaners.

Wipe the Exterior

Use a soft, dry cloth to wipe the front lens, motion sensor, and casing. This improves video quality and ensures sensors work properly after reinstallation.

Cleaning takes just a minute but can prevent charging issues and keep your doorbell in top condition.

Step 4: Connect the Charging Cable

Now it’s time to charge your Eufy doorbell camera. Follow these steps for a safe and effective charge.

Use the Original Cable and Adapter

Plug the USB cable into the doorbell’s charging port. Then connect the other end to the power adapter. Finally, plug the adapter into a wall outlet. Always use the original Eufy cable and a compatible 5V/2A adapter.

Check the LED Indicator

Once connected, the LED light on the doorbell should turn solid red, indicating charging has started. If it doesn’t light up, double-check the connections or try a different outlet.

Place the Doorbell on a Stable Surface

Set the doorbell on a flat, dry surface while charging. Avoid placing it on carpets or near heat sources like radiators or direct sunlight.

Charging typically takes 4 to 6 hours for a full charge, depending on the model and battery capacity. Avoid interrupting the process—unplugging too early can reduce battery life over time.

Step 5: Monitor the Charging Progress

While charging, keep an eye on the LED indicator to track progress.

Red Light = Charging

A solid red light means the battery is actively charging. This is normal and expected.

Green Light = Fully Charged

When the battery reaches 100%, the LED will turn solid green. At this point, you can safely unplug the cable.

Blinking Red Light = Error

If the red light blinks repeatedly, there may be an issue—such as a faulty cable, poor connection, or battery problem. Try reseating the cable or using a different adapter.

Most Eufy doorbells do not support wireless charging, so you must use the USB cable. Avoid leaving the doorbell plugged in for more than 24 hours, as overcharging can degrade the battery.

Step 6: Reinstall the Doorbell

Once fully charged, it’s time to put your Eufy doorbell camera back in place.

Align the Doorbell with the Bracket

Hold the doorbell with the front facing outward. Align the bottom edge with the mounting bracket on the wall.

Slide It Into Place

Gently slide the doorbell downward until it clicks into the bracket. You should hear a secure snap—this means it’s locked in.

Test the Lock

Give the doorbell a light tug to ensure it’s secure. If it moves or feels loose, remove it and try again. A properly installed doorbell won’t wobble or fall.

Turn It Back On (If You Turned It Off)

If you powered off the device earlier, go back to the Eufy app and turn it on. Wait a few seconds for it to reconnect to Wi-Fi and sync with the app.

Your doorbell should now be fully charged and ready to use.

Tips to Extend Battery Life

Charging your Eufy doorbell camera is only part of the equation. To get the most out of your battery, follow these best practices:

• Adjust motion sensitivity: High sensitivity triggers more recordings, draining the battery faster. Lower it in low-traffic areas.
• Reduce video quality: 2K video uses more power than 1080P. Switch to standard quality if battery life is a concern.
• Limit live view usage: Frequent live streaming drains the battery quickly. Use it only when necessary.
• Enable smart alerts: Use AI-powered person or package detection to reduce false alerts and unnecessary recordings.
• Avoid extreme temperatures: Cold weather can reduce battery performance. If possible, install the doorbell in a sheltered area.
• Charge before long trips: If you’ll be away for a week or more, charge the doorbell fully before leaving.

By optimizing settings and charging habits, you can extend battery life and reduce how often you need to recharge.

Troubleshooting Common Charging Issues

Even with proper care, you might run into charging problems. Here’s how to fix the most common issues:

Doorbell Won’t Charge

If the LED doesn’t light up when plugged in, check the following:

• Is the cable fully inserted?
• Is the power adapter working? Try it with another device.
• Is the outlet functional? Test with a lamp or phone charger.
• Is the charging port dirty? Clean it gently.

If none of these work, the battery or cable may be faulty. Contact Eufy support for a replacement.

Battery Drains Too Fast

If your doorbell loses charge in days instead of months, consider:

• High motion activity (e.g., busy street or pets)
• Extreme cold or heat
• Outdated firmware (update via the Eufy app)
• Aging battery (after 2–3 years, batteries degrade)

Try adjusting settings or replacing the battery if needed.

LED Light Doesn’t Change to Green

If the light stays red after 6+ hours, the battery may not be holding a charge. This could indicate a defective battery. Contact Eufy for warranty support.

Doorbell Won’t Reconnect After Charging

If the device doesn’t come back online:

• Restart it by removing and reinstalling.
• Check Wi-Fi signal strength near the door.
• Reset the doorbell via the app if necessary.

Most connectivity issues resolve with a reboot.

When to Replace the Battery

Eufy doorbell cameras use non-remuser-replaceable batteries, meaning you can’t swap them out yourself. However, after 2–3 years of regular use, the battery may no longer hold a full charge.

Signs it’s time for a replacement:

• Battery lasts less than 1 month
• Doorbell shuts down unexpectedly
• Charging takes much longer than usual
• Device feels warm during charging

If you notice these issues, contact Eufy customer support. They may offer a battery replacement service or a discounted upgrade to a newer model.

Final Thoughts

Charging your Eufy doorbell camera is a simple but essential task for maintaining home security. By following this guide, you’ve learned how to safely remove, charge, and reinstall your device—plus how to troubleshoot common problems and extend battery life.

Remember: always use the original charging accessories, charge fully before reinstalling, and keep the device clean. With proper care, your Eufy doorbell will provide reliable, long-lasting protection for your home.

Now that you know how to charge a Eufy doorbell camera, you can enjoy peace of mind knowing your smart doorbell is always ready to watch over your front door.