How to Charge Eufy Doorbell Camera

How to Charge Eufy Doorbell Camera

ByRaphael S. Raygoza

Charging your Eufy doorbell camera is simple when you follow the right steps. This guide covers everything from removing the device to recharging it and reinstalling it securely.

Key Takeaways

  • Check battery level regularly: Use the EufySecurity app to monitor battery status and avoid unexpected power loss.
  • <>Remove the doorbell carefully: Follow the correct steps to detach the device without damaging the mounting bracket or wires.
  • Use the original USB cable and adapter: For safe and efficient charging, always use the included charging accessories.
  • Charge in a dry, indoor environment: Avoid charging the doorbell outdoors or in humid conditions to protect the battery.
  • Reinstall securely after charging: Ensure the doorbell clicks back into place and test functionality before finishing.
  • Enable low-power mode if needed: Reduce motion sensitivity or recording length to extend battery life between charges.
  • Troubleshoot common issues: If charging fails, check connections, restart the app, or reset the device.

How to Charge Eufy Doorbell Camera: A Complete Step-by-Step Guide

If you own a Eufy doorbell camera, you already know how convenient it is to monitor your front door, receive motion alerts, and talk to visitors remotely. But like any battery-powered device, your Eufy doorbell will eventually need a recharge. Whether you have the Eufy Video Doorbell 2K, Doorbell Dual, or another model, the charging process is similar. In this guide, we’ll walk you through how to charge your Eufy doorbell camera safely and efficiently—step by step.

We’ll cover everything from checking your battery level to removing the doorbell, charging it properly, and reinstalling it. You’ll also learn tips to extend battery life and troubleshoot common charging issues. By the end of this guide, you’ll feel confident maintaining your Eufy doorbell so it’s always ready to protect your home.

Why Charging Your Eufy Doorbell Camera Matters

Your Eufy doorbell camera runs on a rechargeable lithium-ion battery. Depending on usage, motion sensitivity settings, and environmental factors, the battery typically lasts between 3 to 6 months. However, heavy use—like frequent motion detection or live viewing—can drain the battery faster.

Regular charging ensures your doorbell stays online and functional. A dead battery means no video recording, no alerts, and no two-way communication. That’s why it’s important to charge your Eufy doorbell camera before it completely dies. Proactive charging helps avoid security gaps and keeps your home protected.

Step 1: Check the Battery Level in the EufySecurity App

Before you start charging, check how much battery life remains. This helps you decide whether a quick top-up is enough or if a full charge is needed.

Open the EufySecurity App

Launch the EufySecurity app on your smartphone or tablet. Make sure you’re logged into the account linked to your doorbell.

Navigate to Your Doorbell

Tap on the device icon for your doorbell camera. It should appear on the home screen or under the “Devices” tab.

View Battery Status

Scroll down to the “Device Status” or “Battery” section. You’ll see a percentage indicating the current charge level. If it’s below 20%, it’s time to charge.

Tip: Enable low battery notifications in the app settings so you get alerts before the battery runs out.

Step 2: Gather the Right Charging Equipment

Using the correct charging tools is essential for safety and performance. Always use the original accessories that came with your Eufy doorbell.

Use the Included USB Cable

Eufy doorbells come with a USB-C or Micro-USB charging cable, depending on the model. Use this cable—not a third-party one—to avoid compatibility issues.

Use a Compatible Power Adapter

Plug the USB cable into a standard 5V/1A or 5V/2A wall adapter. Avoid fast chargers or high-voltage adapters, as they can damage the battery.

Example: A phone charger from your iPhone or Android device works perfectly. Just make sure it’s not a fast-charging model unless specified by Eufy.

Optional: Use a Portable Power Bank

If you don’t have access to a wall outlet, a USB power bank can charge your doorbell on the go. Choose one with at least 5,000mAh capacity.

Step 3: Remove the Eufy Doorbell from the Mount

Now it’s time to safely detach your doorbell from the wall. Follow these steps carefully to avoid damaging the device or the mounting bracket.

Turn Off the Doorbell (Optional)

While not required, you can turn off the doorbell in the app to prevent accidental triggers during removal.

Locate the Release Button or Screw

Most Eufy doorbells have a small release button on the bottom or side. Some models use a security screw on the back.

  • For button-release models: Press and hold the button while gently pulling the doorbell away from the mount.
  • For screw-secured models: Use a Phillips-head screwdriver to remove the screw, then slide the doorbell off.

Detach the Doorbell Gently

Once the release mechanism is activated, slowly pull the doorbell straight out. Don’t yank it—there’s a short wire connecting it to the mount (on wired models).

Note: Battery-only models (like the Eufy Video Doorbell 2K) have no wires. Wired models (like the Doorbell Dual) may have a short cable that powers the chime. Handle it carefully.

Set the Doorbell in a Safe Place

Place the doorbell on a clean, dry surface. Avoid placing it on metal or wet surfaces to prevent short circuits.

Step 4: Connect the Charging Cable

Now that the doorbell is removed, it’s time to plug in the charger.

Locate the Charging Port

Find the USB-C or Micro-USB port on the back or bottom of the doorbell. It’s usually covered by a small rubber flap to protect against moisture.

Open the Port Cover

Gently lift the rubber flap and insert the USB cable. Make sure it’s fully seated and secure.

Plug Into Power Source

Connect the other end of the cable to your wall adapter or power bank. Plug the adapter into an outlet.

Tip: Charge the doorbell indoors in a dry, temperature-controlled environment. Avoid charging in rain, snow, or extreme heat.

Step 5: Monitor the Charging Process

Your Eufy doorbell doesn’t have a built-in screen, so you’ll need to check the app to monitor charging progress.

Check the App for Charging Status

Open the EufySecurity app and go to your doorbell’s device page. If the doorbell is charging, you’ll see a lightning bolt icon or “Charging” label next to the battery percentage.

Wait for a Full Charge

A full charge typically takes 4 to 6 hours, depending on the battery capacity and power source. Avoid interrupting the charge cycle.

Example: If your battery was at 10%, it may take 5 hours to reach 100%. Don’t unplug it early unless necessary.

Look for Visual Indicators (If Available)

Some Eufy models have a small LED light that glows red while charging and turns green when fully charged. Check your user manual to confirm if your model has this feature.

Step 6: Reinstall the Doorbell After Charging

Once the battery is fully charged, it’s time to put the doorbell back on the wall.

Disconnect the Charging Cable

Unplug the USB cable and close the rubber port cover securely. This protects the charging port from dust and moisture.

Align the Doorbell with the Mount

Hold the doorbell so the back aligns with the mounting bracket. Make sure the connectors (if any) line up properly.

Slide or Click Into Place

For button-release models: Press the doorbell firmly onto the mount until you hear a click.

For screw models: Slide the doorbell onto the mount and reinsert the security screw. Tighten it with a screwdriver.

Test the Installation

Open the EufySecurity app and check the device status. Ensure the doorbell is online and the battery shows 100%.

Tip: Wave your hand in front of the doorbell to test motion detection and confirm it’s working properly.

Tips to Extend Battery Life Between Charges

To reduce how often you need to charge your Eufy doorbell, follow these best practices.

Adjust Motion Detection Settings

High motion sensitivity can drain the battery quickly. In the app, go to “Motion Detection” and reduce the sensitivity level. You can also set activity zones to ignore areas like busy streets.

Shorten Recording Length

Longer recordings use more power. Set the recording duration to 15 or 30 seconds instead of 60 seconds.

Enable Low-Power Mode

Some Eufy models offer a low-power mode that reduces video quality or disables night vision when the battery is low. Use this feature sparingly to extend runtime.

Limit Live Viewing

Frequent live streaming drains the battery fast. Only use live view when necessary.

Keep the Doorbell Clean

Dirt, snow, or ice on the lens can trigger false motion alerts. Wipe the lens monthly with a soft, dry cloth.

Troubleshooting Common Charging Issues

Sometimes, your Eufy doorbell may not charge properly. Here’s how to fix common problems.

Doorbell Won’t Charge

  • Check the cable and adapter: Try a different USB cable or power source to rule out faulty equipment.
  • Clean the charging port: Use a dry toothbrush to remove dust or debris from the port.
  • Restart the doorbell: Remove the battery (if accessible) or hold the reset button for 10 seconds.

Battery Drains Too Fast

  • Review motion settings: High sensitivity or 24/7 recording can cause rapid drain.
  • Check for firmware updates: Outdated software may cause battery issues. Update via the app.
  • Inspect for damage: A swollen or leaking battery needs replacement. Contact Eufy support.

Doorbell Won’t Reconnect After Charging

  • Reinstall properly: Make sure the doorbell is fully seated on the mount.
  • Restart the app: Close and reopen the EufySecurity app.
  • Reset the device: Use the reset button or remove and reinsert the battery.

Charging Icon Not Showing in App

  • Ensure the cable is connected: Double-check that the USB cable is firmly plugged in.
  • Update the app: Make sure you’re using the latest version of the EufySecurity app.
  • Reboot your phone: Sometimes a simple restart fixes app glitches.

When to Replace the Battery

Even with proper care, lithium-ion batteries degrade over time. If you notice your Eufy doorbell battery draining in just a few weeks—or if it won’t hold a charge—it may be time for a replacement.

Most Eufy doorbells have removable batteries, but some require professional service. Check your model’s user manual or contact Eufy customer support for guidance. Never attempt to replace the battery with a non-Eufy part, as this can void your warranty and damage the device.

Conclusion

Charging your Eufy doorbell camera is a simple process that ensures your home stays secure and your device stays functional. By following this guide, you’ve learned how to check the battery, remove the doorbell, charge it safely, and reinstall it correctly. You’ve also picked up tips to extend battery life and troubleshoot common issues.

Remember: how to charge your Eufy doorbell camera isn’t just about plugging it in—it’s about doing it the right way to protect your investment and your peace of mind. With regular maintenance and smart usage habits, your Eufy doorbell will keep watching over your home for years to come.

Now that you’re an expert, share this guide with friends or family who own Eufy devices. And don’t forget to charge your doorbell before the battery gets too low!

Similar Posts