How to Charge Eufy Security Camera

Charging your Eufy security camera is simple when you follow the right steps. This guide walks you through setup, charging methods, maintenance, and common issues—ensuring your camera stays powered and protected.

Key Takeaways

Use only Eufy-approved chargers and cables: Non-certified accessories can damage your camera or void the warranty.
Charge in a dry, temperature-controlled environment: Avoid extreme heat or cold to protect battery life and performance.
Monitor charging status via the Eufy app: The app shows battery level and alerts you when charging is complete.
Recharge before the battery drops below 20%: Regular partial charging helps extend battery lifespan.
For wired models, ensure continuous power supply: Use weatherproof cables and outlets for outdoor installations.
Clean charging ports regularly: Dust and debris can interfere with charging efficiency.
Contact Eufy support if charging issues persist: Persistent problems may indicate hardware failure or a defective battery.

How to Charge Eufy Security Camera: A Complete Step-by-Step Guide

Keeping your Eufy security camera charged is essential for uninterrupted home monitoring. Whether you’re using a battery-powered model like the Eufy SoloCam or a wired version such as the Eufy Video Doorbell, understanding how to charge your device properly ensures reliable performance and extends its lifespan.

In this comprehensive guide, you’ll learn everything you need to know about charging your Eufy security camera—from identifying your model and preparing the charging setup to troubleshooting common issues. We’ll cover both wired and wireless charging methods, offer practical tips for maintaining battery health, and explain how to use the Eufy Security app to monitor power levels.

By the end of this guide, you’ll be able to confidently charge your Eufy camera, avoid common mistakes, and keep your home security system running smoothly—rain or shine.

Understanding Your Eufy Security Camera Model

Before you begin charging, it’s important to know which type of Eufy security camera you own. Eufy offers a range of models, each with different power requirements and charging methods.

Battery-Powered Cameras

Models like the Eufy SoloCam S220, S330, and EufyCam 2 series are battery-operated. These cameras are wireless and ideal for flexible placement, but they require periodic recharging. Most battery-powered models use rechargeable lithium-ion batteries that last several months on a single charge, depending on usage and settings.

Wired Cameras

Wired models such as the Eufy Video Doorbell (wired version) or the Eufy Indoor Cam 2K connect directly to your home’s power supply. These cameras don’t need manual charging—they draw power continuously from an electrical source. However, they still require proper wiring and weatherproofing for outdoor use.

Hybrid Models

Some Eufy cameras, like the Eufy Video Doorbell (battery + wired), offer dual power options. You can install them with a wired connection for constant power or use the battery for temporary setup. Knowing your model helps you choose the right charging strategy.

What You’ll Need to Charge Your Eufy Camera

Gathering the right tools before you start ensures a smooth charging process. Here’s what you’ll need:

Eufy-approved USB cable: Most Eufy cameras use a micro-USB or USB-C cable. Always use the one provided in the box or a certified replacement.
Compatible power adapter: A standard 5V/2A USB wall adapter works best. Avoid fast chargers unless specified by Eufy.
Access to a power outlet: For indoor charging, plug into a nearby outlet. For outdoor cameras, consider a weatherproof extension cord or outdoor-rated power source.
Clean, dry workspace: Charge your camera in a safe, dry area away from water, dust, or extreme temperatures.
Eufy Security app (installed on your phone): This app helps you monitor battery levels and receive charging notifications.

Step-by-Step: How to Charge a Battery-Powered Eufy Camera

If you’re using a battery-powered Eufy camera, follow these steps to recharge it safely and efficiently.

Step 1: Check the Battery Level

Before removing your camera, check its current battery status. Open the Eufy Security app, select your camera, and view the battery percentage. If it’s below 20%, it’s time to recharge. Waiting too long can degrade the battery over time.

Step 2: Remove the Camera from Its Mount

Carefully detach the camera from its wall or ceiling mount. Most Eufy cameras have a quick-release mechanism—simply press the release button or slide the camera out. Be gentle to avoid damaging the housing or internal components.

Step 3: Locate the Charging Port

Find the charging port on your camera. It’s usually on the back or bottom and covered by a rubber flap to protect against moisture. Lift the flap to expose the port—common types include micro-USB or USB-C.

Step 4: Connect the Charging Cable

Plug the USB cable into the camera’s charging port. Then, connect the other end to a power adapter and plug it into a wall outlet. Ensure the connection is secure to avoid interruptions.

Step 5: Monitor the Charging Process

Once connected, the camera’s LED indicator will light up. A red or orange light typically means it’s charging; green or blue indicates a full charge. Charging time varies by model—most take 4 to 6 hours to fully recharge.

Step 6: Reinstall the Camera

After charging, disconnect the cable, close the charging port flap, and reattach the camera to its mount. Make sure it’s securely fastened and properly angled for optimal coverage.

Step 7: Confirm Charging in the App

Open the Eufy Security app and check the battery level again. It should show 100% or close to it. You’ll also receive a notification when charging is complete.

Charging a Wired Eufy Security Camera

Wired Eufy cameras don’t require manual charging, but proper installation ensures continuous power. Here’s how to set it up correctly.

Step 1: Turn Off Power at the Circuit Breaker

Safety first! Before working with electrical wiring, turn off the power at your home’s circuit breaker. Use a voltage tester to confirm the wires are not live.

Step 2: Remove the Old Doorbell or Camera (If Applicable)

If replacing an existing doorbell, unscrew and disconnect the old unit. Note the wire positions—usually labeled “front” and “transformer”—so you can reconnect them correctly.

Step 3: Install the Eufy Mounting Bracket

Secure the Eufy mounting bracket to the wall using screws. Feed the existing wires through the bracket and connect them to the camera’s terminals. Most Eufy wired models are compatible with standard 8–24V AC doorbell transformers.

Step 4: Attach the Camera and Restore Power

Snap the camera onto the bracket and tighten any security screws. Turn the power back on at the circuit breaker. The camera should power up automatically.

Step 5: Test the Connection

Open the Eufy Security app and check if the camera is online. You should see a live feed and receive motion alerts. If the camera doesn’t power on, double-check the wiring and voltage.

Using Solar Panels for Continuous Charging

For battery-powered Eufy cameras placed in sunny areas, a solar panel can provide continuous charging—eliminating the need for manual recharging.

How Solar Charging Works

Eufy offers compatible solar panels (like the Eufy Solar Panel for SoloCam) that connect directly to your camera. The panel converts sunlight into electricity, trickle-charging the battery throughout the day.

Installation Tips

Mount the solar panel in a location that receives at least 6 hours of direct sunlight daily.
Angle the panel toward the sun—south-facing is ideal in the Northern Hemisphere.
Use the included cable to connect the panel to the camera’s charging port.
Ensure the connection is secure and protected from rain using the weatherproof flap.

Benefits of Solar Charging

Solar charging reduces maintenance, extends battery life, and ensures your camera stays powered even during outages. It’s an eco-friendly solution that’s perfect for remote or hard-to-reach locations.

Best Practices for Maintaining Battery Health

Proper charging habits can significantly extend your Eufy camera’s battery lifespan. Follow these tips to keep your device in top condition.

Avoid Full Discharge

Don’t let the battery drop to 0% regularly. Lithium-ion batteries degrade faster when fully drained. Recharge when the level reaches 20–30%.

Use Partial Charging

It’s okay to charge your camera before it’s completely empty. In fact, partial charging (e.g., from 40% to 80%) is better for battery longevity than full cycles.

Store in Moderate Temperatures

Extreme heat or cold damages batteries. Avoid charging your camera in direct sunlight, near heaters, or in freezing conditions. Ideal charging temperature is between 32°F and 95°F (0°C to 35°C).

Clean the Charging Port

Dust, dirt, and moisture can interfere with charging. Use a dry cotton swab to gently clean the port every few months. Never use water or cleaning fluids.

Update Firmware Regularly

Eufy releases firmware updates that can improve battery efficiency. Check the app for updates and install them to ensure optimal performance.

Troubleshooting Common Charging Issues

Even with proper care, you might encounter charging problems. Here’s how to diagnose and fix the most common issues.

Camera Won’t Charge

Check the cable and adapter: Try a different USB cable or power source. Faulty accessories are a common cause.
Inspect the charging port: Look for debris or damage. Clean it gently if needed.
Test the battery: If the camera still won’t charge, the battery may be defective. Contact Eufy support.

Charging Takes Too Long

Use a higher-output adapter: A 2A adapter charges faster than a 1A one. Avoid phone chargers with low output.
Avoid charging in cold environments: Batteries charge slower in low temperatures. Move the camera indoors if possible.

Battery Drains Quickly

Adjust motion detection settings: High sensitivity or frequent recordings drain the battery. Reduce the detection zone or lower the sensitivity.
Check for firmware updates: Outdated software can cause power inefficiencies.
Review recording schedule: Continuous recording uses more power than event-based recording.

LED Indicator Not Lighting Up

Ensure the cable is fully inserted: A loose connection prevents charging.
Try a different outlet: The outlet may not be working.
Reset the camera: Press and hold the reset button for 10 seconds, then reconnect.

Solar Panel Not Charging

Check sunlight exposure: The panel needs direct sunlight to function.
Inspect the cable connection: Ensure it’s securely plugged into both the panel and camera.
Clean the solar panel: Dirt or snow can block sunlight. Wipe it with a soft cloth.

Charging Safety Tips

Safety should always come first when charging electronic devices. Follow these guidelines to protect yourself and your equipment.

Never charge near water: Keep the camera and cables away from sinks, pools, or rainy areas.
Don’t use damaged cables: Frayed or broken cables can cause short circuits or fires.
Avoid overcharging: While modern batteries have built-in protection, unplugging once fully charged is a good habit.
Use surge protectors: Plug your charger into a surge protector to guard against power spikes.
Keep away from children and pets: Cables and small parts can be choking hazards.

When to Contact Eufy Support

If you’ve tried all troubleshooting steps and your camera still won’t charge, it may be time to reach out to Eufy’s customer support.

Signs you should contact support:

The camera won’t power on after multiple charging attempts.
The battery swells or leaks—this is a serious safety risk.
The charging port is physically damaged.
You suspect a manufacturing defect.

You can contact Eufy support through their website, email, or live chat. Have your model number and purchase date ready for faster assistance.

Conclusion

Charging your Eufy security camera doesn’t have to be complicated. Whether you’re using a battery-powered model, a wired setup, or a solar panel, following the right steps ensures your camera stays powered and ready to protect your home.

Remember to use only Eufy-approved accessories, charge in safe conditions, and monitor battery levels through the app. Regular maintenance and smart charging habits will keep your camera running efficiently for years to come.

With this guide, you’re now equipped to handle any charging scenario—so you can focus on what matters most: peace of mind.