How to Charge Eufy Wireless Doorbell

Charging your Eufy wireless doorbell is simple and essential for uninterrupted performance. This guide walks you through the entire process—from removing the doorbell to recharging and reinstalling it—so you can keep your smart home security running smoothly.

Key Takeaways

• Use the correct USB cable and power source: Always use the included USB-C or micro-USB cable (depending on model) and a 5V/1A adapter for safe, efficient charging.
• Fully charge before first use: New Eufy doorbells should be charged for at least 4–6 hours before installation to ensure maximum battery life.
• Check battery level via the Eufy app: Monitor your doorbell’s battery status in real time through the app to avoid unexpected power loss.
• Remove the doorbell carefully: Use the included removal tool or a flathead screwdriver to gently detach the doorbell from its mount without damaging the device or wall.
• Recharge every 3–6 months: Depending on usage and climate, most Eufy wireless doorbells need recharging every few months—don’t wait until it dies.
• Avoid extreme temperatures: Charge your doorbell in a cool, dry place (ideally between 32°F and 104°F) to protect battery health.
• Reset if charging fails: If the doorbell doesn’t charge, try a soft reset or contact Eufy support for firmware or hardware issues.

How to Charge Eufy Wireless Doorbell: A Complete Step-by-Step Guide

If you’ve recently installed a Eufy wireless doorbell or noticed your battery running low, you’re probably wondering: How do I charge this thing? Don’t worry—you’re not alone. Many smart doorbell users, especially those new to wireless models, find the charging process a bit confusing at first. But the truth is, charging your Eufy wireless doorbell is straightforward once you know the steps.

In this comprehensive guide, we’ll walk you through everything you need to know about charging your Eufy wireless doorbell—from understanding the battery system to safely removing, charging, and reinstalling your device. Whether you own the Eufy Video Doorbell Dual, the Eufy SoloCam Doorbell, or an older model, this guide covers all the essentials. You’ll also learn how to monitor battery levels, extend battery life, and troubleshoot common charging issues.

By the end of this article, you’ll be a pro at keeping your Eufy doorbell powered up and ready to protect your home 24/7.

Why Charging Your Eufy Wireless Doorbell Matters

Unlike wired doorbells that draw power directly from your home’s electrical system, Eufy wireless doorbells rely on rechargeable lithium-ion batteries. This gives them the flexibility to be installed almost anywhere—without the need for complex wiring. However, that convenience comes with the responsibility of regular charging.

A fully charged Eufy doorbell can last anywhere from 3 to 6 months, depending on usage, climate, and settings like motion sensitivity and video quality. But if you ignore low battery warnings or fail to charge it properly, you risk missing important visitors, deliveries, or security alerts.

Charging your doorbell correctly also helps maintain battery health over time. Lithium-ion batteries degrade faster when they’re frequently drained to zero or charged with incompatible power sources. By following best practices, you can extend the lifespan of your doorbell and avoid costly replacements.

What You’ll Need to Charge Your Eufy Doorbell

Before you begin, gather the following items to ensure a smooth charging process:

• The Eufy wireless doorbell unit – This is the main device that mounts on your doorframe.
• USB charging cable – Most Eufy doorbells come with a USB-C or micro-USB cable. Use the one provided in the box for best results.
• 5V/1A USB power adapter – A standard phone charger works perfectly. Avoid fast chargers or high-voltage adapters, as they can damage the battery.
• Removal tool (or flathead screwdriver) – Eufy includes a small tool to help detach the doorbell from its mount. If you’ve misplaced it, a flathead screwdriver will work in a pinch.
• A clean, dry workspace – Choose a flat surface like a table or countertop to charge your doorbell safely.

Having these items ready will save you time and prevent frustration during the charging process.

Step 1: Check the Battery Level in the Eufy App

Before you remove your doorbell, it’s smart to check its current battery level. This helps you decide whether it needs charging now or if you can wait a bit longer.

Open the Eufy Security App

Launch the Eufy Security app on your smartphone or tablet. Make sure you’re logged into the account linked to your doorbell.

Navigate to Your Device

Tap on the “Devices” tab at the bottom of the screen. Find your doorbell in the list and select it.

View Battery Status

On the device overview page, look for the battery icon—usually located near the top or in the settings menu. The app will display the current battery percentage and may also show a warning if the battery is low (typically below 20%).

If the battery is above 30%, you might be able to delay charging. But if it’s below 20%, it’s time to plug in.

Step 2: Safely Remove the Doorbell from the Mount

Now that you’ve confirmed the battery is low, it’s time to remove the doorbell from its wall mount. This step requires care to avoid damaging the device or your wall.

Locate the Release Slot

On the bottom edge of the doorbell, you’ll find a small slot or groove. This is where the removal tool (or screwdriver) fits in.

Insert the Removal Tool

Gently insert the tip of the Eufy removal tool—or a flathead screwdriver—into the slot. Apply slight upward pressure. You should feel the doorbell begin to loosen.

Lift the Doorbell Off

Once the latch releases, carefully lift the doorbell straight up and away from the mount. Avoid pulling at an angle, as this could strain the internal components.

Set It Down Safely

Place the doorbell on a soft, clean surface—like a towel or cloth—to prevent scratches or damage to the lens or casing.

Step 3: Connect the Charging Cable

With the doorbell removed, it’s time to plug it in.

Find the Charging Port

On the back or bottom of the doorbell, locate the USB charging port. Depending on your model, it will be either USB-C (oval-shaped) or micro-USB (trapezoidal).

Plug in the Cable

Insert the appropriate end of the USB cable into the doorbell’s charging port. Make sure it’s fully seated—don’t force it, but ensure a snug fit.

Connect to a Power Source

Plug the other end of the cable into a 5V/1A USB wall adapter, then connect it to a power outlet. You can also use a computer’s USB port, though charging may be slower.

Check for Charging Indicator

Most Eufy doorbells have an LED light that turns red or orange when charging begins. If you see this light, you’re all set. If not, double-check the connections.

Step 4: Charge for the Recommended Time

Now, let the doorbell charge fully. How long this takes depends on the model and current battery level.

Initial Charge for New Devices

If this is the first time charging your doorbell (or if it’s a new unit), charge it for at least 4 to 6 hours. This ensures the battery reaches 100% and calibrates properly.

Regular Recharging

For routine top-ups, 2 to 3 hours is usually enough to go from 20% to 100%. However, it’s best to leave it plugged in until the LED turns green or blue (indicating a full charge).

Avoid Overcharging

While modern lithium-ion batteries have built-in protection against overcharging, it’s still a good idea to unplug the doorbell once it’s fully charged. Leaving it plugged in for days can reduce long-term battery health.

Step 5: Reinstall the Doorbell

Once charging is complete, it’s time to put your doorbell back in place.

Align the Doorbell with the Mount

Hold the doorbell so the back aligns with the wall mount. The mounting bracket has grooves or clips that guide proper placement.

Slide It Down Securely

Gently slide the doorbell downward until you hear a soft click. This means it’s locked into place.

Test the Connection

Open the Eufy app and check if the doorbell reconnects automatically. You should see the live view and confirm the battery level is now higher.

Secure with Screws (Optional)

Some Eufy models allow you to secure the doorbell with a small screw to prevent tampering. If your model includes this feature, use the provided screw and a Phillips head screwdriver to lock it in.

Tips to Extend Battery Life

Charging your doorbell is only half the battle. To get the most out of each charge, follow these practical tips:

Adjust Motion Sensitivity

High motion sensitivity causes the doorbell to record more frequently, draining the battery faster. In the Eufy app, go to Settings > Motion Detection and lower the sensitivity to “Medium” or “Low” if you live in a quiet area.

Limit Video Quality

Recording in 2K or 1080p uses more power than 720p. If battery life is a concern, switch to a lower resolution in the app under Video Settings.

Use Activity Zones

Set up activity zones to focus on important areas (like your front walkway) and ignore others (like a busy street). This reduces unnecessary recordings.

Avoid Extreme Temperatures

Cold weather slows down battery chemistry, reducing runtime. If you live in a cold climate, consider bringing the doorbell inside during winter storms or using a weatherproof cover.

Enable Power-Saving Mode

Some Eufy models offer a “Power-Saving” or “Eco Mode” that reduces background activity. Turn this on in the app to extend battery life.

Charge Before It Dies

Don’t wait until the battery is completely dead. Recharge when it drops to 20–30% to maintain battery health.

Troubleshooting Common Charging Issues

Sometimes, your Eufy doorbell might not charge as expected. Here’s how to fix the most common problems.

Doorbell Won’t Charge

If the LED doesn’t light up when plugged in:

• Check the USB cable and adapter—try a different one if possible.
• Ensure the charging port is clean and free of dust or debris.
• Try charging from a different outlet or computer USB port.
• Restart the doorbell by holding the power button (if available) for 10 seconds.

Battery Drains Too Fast

If your doorbell loses power quickly after charging:

• Review motion settings and reduce sensitivity.
• Check for firmware updates in the Eufy app—outdated software can cause battery drain.
• Ensure the doorbell isn’t exposed to direct sunlight or freezing temperatures.

Doorbell Won’t Reconnect After Charging

If the app shows “offline” after reinstalling:

• Make sure the doorbell is fully seated on the mount.
• Restart your Wi-Fi router and the doorbell.
• Re-pair the device in the app if necessary.

Charging Port Feels Loose

If the USB cable doesn’t fit snugly:

• Do not force it—this can damage the port.
• Use only the original cable or a high-quality replacement.
• Contact Eufy support if the port appears damaged.

When to Contact Eufy Support

If you’ve tried all troubleshooting steps and your doorbell still won’t charge or hold a charge, it may have a hardware issue. Contact Eufy customer support if:

• The battery won’t charge after 6+ hours.
• The doorbell overheats during charging.
• You notice physical damage to the battery or charging port.
• The device fails to turn on even when fully charged.

Eufy offers a 12- to 18-month warranty on most doorbells, so you may be eligible for a replacement.

Final Thoughts: Keep Your Eufy Doorbell Powered and Protected

Charging your Eufy wireless doorbell doesn’t have to be a hassle. With the right tools, a little patience, and these step-by-step instructions, you can keep your smart doorbell running smoothly for years. Remember to monitor battery levels regularly, charge before it’s too late, and follow best practices to extend battery life.

A well-maintained Eufy doorbell doesn’t just save you from missed deliveries—it gives you peace of mind knowing your home is secure, even when you’re away. So the next time you see that low battery warning, don’t panic. Just grab your cable, follow this guide, and get back to enjoying the convenience of smart home security.