How to Check Battery Level on Eufy Camera

Checking the battery level on your Eufy camera is simple and essential for maintaining reliable home security. This guide walks you through multiple methods—using the Eufy Security app, device settings, and physical indicators—to monitor battery health and avoid unexpected power loss.

Key Takeaways

• Use the Eufy Security app to view real-time battery percentage and receive low-battery alerts directly on your smartphone.
• Check battery status in device settings within the app for detailed power information and usage history.
• Look for LED indicators on select Eufy camera models that flash or change color to signal low battery.
• Enable low-battery notifications in the app to get timely alerts before your camera powers down.
• Monitor battery health regularly to extend lifespan and ensure continuous surveillance coverage.
• Understand battery-saving tips like adjusting motion sensitivity and reducing recording length to prolong charge.
• Troubleshoot common issues such as inaccurate readings or delayed alerts with simple fixes.

How to Check Battery Level on Eufy Camera: A Complete Guide

Keeping your Eufy camera powered is crucial for uninterrupted home security. Whether you’re monitoring your front door, backyard, or nursery, a dead battery can leave you vulnerable. Fortunately, Eufy makes it easy to check your camera’s battery level using a few simple methods. In this guide, you’ll learn how to monitor your Eufy camera’s battery status through the Eufy Security app, device settings, and even physical indicators on the camera itself. We’ll also cover tips to extend battery life and troubleshoot common issues.

By the end of this guide, you’ll know exactly how to stay on top of your camera’s power levels, receive timely alerts, and ensure your home stays protected 24/7.

Why Monitoring Battery Level Matters

Before diving into the steps, it’s important to understand why checking your Eufy camera’s battery level is so essential. Unlike wired security cameras, Eufy’s battery-powered models offer flexibility and easy installation—no drilling or complex wiring required. However, this convenience comes with the responsibility of managing battery life.

A low or dead battery means your camera stops recording, misses motion events, and fails to send alerts. This creates blind spots in your security coverage, especially during critical moments like break-ins or package deliveries. Regularly checking the battery level helps you recharge or replace it before it dies, ensuring your system remains active and reliable.

Additionally, monitoring battery health over time can reveal patterns—such as faster drain during extreme weather or high-traffic periods—so you can adjust settings accordingly. It also helps you identify potential issues, like a faulty battery or excessive power consumption, before they become major problems.

Method 1: Check Battery Level via the Eufy Security App

The easiest and most accurate way to check your Eufy camera’s battery level is through the Eufy Security app. This free app, available for iOS and Android, gives you full control over your devices and real-time updates on battery status.

Step 1: Open the Eufy Security App

Start by launching the Eufy Security app on your smartphone or tablet. Make sure you’re logged into the account linked to your camera. If you haven’t set up the app yet, download it from the App Store or Google Play, create an account, and follow the on-screen instructions to add your camera.

Once the app is open, you’ll see a dashboard with all your connected devices. Look for your Eufy camera in the list—it should appear with its name (e.g., “Front Door Cam” or “Backyard Camera”).

Step 2: Select Your Camera

Tap on the camera you want to check. This will open the live view screen, where you can see the current video feed. At the top of the screen, you’ll notice a battery icon next to the camera name. This icon displays the current battery percentage—such as 85% or 42%—giving you an instant snapshot of power levels.

If the battery icon shows a low percentage (below 20%), it’s time to recharge. The app uses color coding to help you interpret the status: green for good, yellow for moderate, and red for low.

Step 3: View Detailed Battery Information

For more detailed insights, tap the settings gear icon (usually in the top-right corner of the live view screen). This opens the device settings menu. Scroll down until you find the “Battery” or “Power” section.

Here, you’ll see the exact battery percentage, estimated remaining usage time, and sometimes a battery health indicator. Some models also show historical data, like how long the battery has been in use or how many charge cycles it’s completed.

This information helps you plan recharging schedules and assess whether the battery is degrading over time. For example, if a fully charged battery used to last 6 months but now only lasts 3, it might be nearing the end of its lifespan.

Step 4: Enable Low-Battery Notifications

To avoid surprises, make sure low-battery alerts are turned on. In the same settings menu, look for “Notifications” or “Alerts.” Toggle on “Low Battery Warning” or a similar option.

Once enabled, you’ll receive a push notification on your phone when the battery drops below a certain threshold—usually 20% or 15%. This gives you plenty of time to recharge before the camera shuts down.

You can also customize the alert threshold in some models. For instance, you might set a warning at 30% if you’re going on vacation and won’t be able to check the camera for a week.

Method 2: Check Battery Level in Device Settings

If you prefer a more technical approach, you can access battery information directly through the camera’s settings within the app. This method is especially useful if you manage multiple cameras and want to compare their power levels.

Step 1: Go to Device Management

From the app’s home screen, tap the “Devices” tab at the bottom. This shows a list of all your Eufy cameras and sensors. Find the camera you want to inspect and tap the three-dot menu (or settings icon) next to its name.

Select “Device Settings” from the dropdown menu. This takes you to a comprehensive settings page with options for video quality, motion detection, night vision, and power management.

Step 2: Navigate to Power or Battery Section

Scroll through the settings until you find the “Power” or “Battery” section. Depending on your camera model, this might be labeled “Battery Status,” “Power Management,” or “Energy Settings.”

Tap to open it. You’ll see the current battery percentage, along with additional details like:

– Estimated time until full discharge
– Number of charge cycles
– Battery temperature (on some models)
– Power-saving mode status

This data helps you understand how efficiently your camera is using power and whether settings adjustments could extend battery life.

Step 3: Review Usage History (If Available)

Some advanced Eufy models, like the EufyCam 2 or SoloCam S40, offer usage history graphs. These show battery drain over days or weeks, highlighting patterns such as increased usage during nighttime or high-motion periods.

For example, you might notice the battery drops 5% per day during summer when motion detection is triggered frequently by passing cars or animals. In winter, it might only drop 2% per day due to less activity.

Use this information to tweak settings—like reducing motion sensitivity or shortening recording duration—to conserve power.

Method 3: Use LED Indicators on the Camera

Not all Eufy cameras have LED indicators, but many battery-powered models do. These small lights provide a quick visual cue about battery status without needing to open the app.

Step 1: Locate the LED Light

Check the front or side of your camera for a small LED light. On most Eufy models, it’s near the lens or on the bottom edge. The light is usually white, blue, or green when the camera is active and fully charged.

Step 2: Interpret the Light Patterns

Different colors and blinking patterns indicate various statuses:

– **Solid green or blue**: Camera is on and battery is above 50%.
– **Blinking yellow or amber**: Battery is low (typically below 20%).
– **Rapid blinking red**: Battery is critically low and needs immediate charging.
– **No light**: Camera is off or battery is completely drained.

For example, if your EufyCam 2C shows a blinking yellow light, it’s time to recharge soon. If it’s blinking red, plug it in immediately to avoid losing footage.

Note: LED behavior can vary slightly between models. Always refer to your camera’s user manual for exact meanings.

Step 3: Use the Light for Quick Checks

The LED is especially handy for quick visual checks—like when you’re near the camera and don’t want to pull out your phone. A glance at the light tells you if the battery is healthy or needs attention.

However, keep in mind that LED indicators are less precise than the app. They give a general idea but not an exact percentage. For accurate readings, always use the app.

Tips to Extend Eufy Camera Battery Life

Checking the battery is only half the battle. To maximize uptime and reduce how often you need to recharge, follow these practical tips.

Adjust Motion Detection Settings

Motion detection is a major battery drain. Every time the camera senses movement, it wakes up, records, and sends an alert—using significant power.

To save battery:

– Lower the motion sensitivity in the app. Set it to “Medium” or “Low” if you’re getting too many false alerts from trees or shadows.
– Use activity zones to focus detection on important areas (like your front door) and ignore others (like a busy street).
– Set a schedule so the camera only records during certain hours (e.g., 6 PM to 7 AM).

Reduce Recording Length

By default, Eufy cameras record for 12 seconds per motion event. You can shorten this to 6 or 3 seconds in the settings.

Shorter clips use less power and storage, especially if you have frequent triggers. Just make sure the clip is long enough to capture useful footage.

Turn Off Non-Essential Features

Features like two-way audio, color night vision, and continuous recording drain the battery faster.

– Only enable two-way talk when needed.
– Switch to black-and-white night vision if color isn’t essential.
– Avoid 24/7 recording unless absolutely necessary—most users only need motion-based recording.

Keep the Camera Clean and Cool

Dirt, dust, and extreme temperatures affect battery performance.

– Clean the lens and sensor regularly to ensure accurate motion detection.
– Avoid placing the camera in direct sunlight or near heat sources, which can overheat the battery.
– In winter, cold weather reduces battery efficiency. Consider using a weatherproof housing or bringing the camera indoors during extreme cold.

Use a Solar Panel (If Compatible)

Many Eufy cameras, like the EufyCam 2 and SoloCam S230, support solar panels. These attach to the camera and charge it using sunlight, eliminating the need for manual recharging.

A solar panel can keep your camera powered indefinitely in sunny areas. Just make sure it’s positioned to receive at least 4–6 hours of direct sunlight daily.

Troubleshooting Common Battery Issues

Even with proper care, you might encounter battery problems. Here’s how to fix the most common ones.

Battery Percentage Doesn’t Update

Sometimes the app shows an outdated battery level. This happens if the camera hasn’t synced recently.

– Force close and reopen the Eufy Security app.
– Restart your phone.
– Ensure the camera has a strong Wi-Fi connection—weak signals delay updates.
– Manually refresh the app by pulling down on the home screen.

Camera Dies Sooner Than Expected

If your battery drains faster than usual:

– Check for firmware updates in the app. Eufy often releases updates to improve power efficiency.
– Review recent settings changes—did you increase motion sensitivity or enable new features?
– Test the camera in a different location to rule out Wi-Fi interference.
– If the battery is over a year old, it may be degrading. Consider replacing it.

Low-Battery Alerts Don’t Appear

If you’re not receiving notifications:

– Go to your phone’s settings and ensure Eufy Security has permission to send notifications.
– Check that “Do Not Disturb” mode is off.
– In the app, verify that low-battery alerts are enabled for that specific camera.
– Make sure your phone isn’t blocking background app refresh for Eufy.

Camera Won’t Charge

If the battery won’t charge:

– Use the original USB cable and power adapter. Third-party chargers may not provide enough power.
– Clean the charging port with a dry toothbrush to remove dust.
– Try a different power source, like a wall outlet instead of a computer USB port.
– If the camera still won’t charge, contact Eufy support—the battery or charging circuit may be faulty.

Conclusion

Checking the battery level on your Eufy camera is a simple but vital task for maintaining reliable home security. Whether you use the Eufy Security app, device settings, or LED indicators, staying informed about your camera’s power status helps prevent unexpected outages and ensures continuous protection.

By following the steps in this guide, you can monitor battery health, receive timely alerts, and extend the lifespan of your camera. Combine regular checks with smart settings adjustments—like lowering motion sensitivity and using solar panels—to maximize efficiency.

Remember, a well-maintained battery means fewer recharges, fewer blind spots, and greater peace of mind. So the next time you glance at your front door or backyard, you’ll know your Eufy camera is ready to watch over what matters most.