How to Check Battery Life on Eufy Camera

Learn how to check battery life on Eufy camera using the EufySecurity app, camera settings, and LED indicators. This guide covers all Eufy models, offers tips to extend battery life, and helps troubleshoot common issues.

Key Takeaways

• Use the EufySecurity app: The easiest way to check battery life is through the app’s device dashboard, which shows real-time battery percentage.
• Check LED indicators: Some Eufy cameras have colored LEDs that flash or glow to indicate low battery or charging status.
• Enable battery notifications: Set up alerts in the app to get notified when your camera’s battery drops below a certain level.
• Optimize settings for longer life: Reduce motion sensitivity, lower video quality, and limit recording time to extend battery duration.
• Regularly update firmware: Keep your camera’s software up to date to ensure accurate battery reporting and improved performance.
• Recharge promptly: Avoid letting the battery drain completely; recharge when it hits 20–30% to maintain battery health.
• Troubleshoot inaccurate readings: If battery levels seem off, restart the camera or re-sync it with the app.

Introduction: Why Monitoring Your Eufy Camera Battery Matters

If you’ve invested in a Eufy security camera—especially a wireless or battery-powered model like the Eufy SoloCam S40, EufyCam 2, or EufyCam 2C—you know how important it is to keep an eye on battery life. These cameras offer incredible flexibility, allowing you to install them anywhere without worrying about power outlets. But that freedom comes with a responsibility: monitoring and maintaining battery levels.

Knowing how to check battery life on Eufy camera isn’t just about convenience—it’s about ensuring your home stays protected. A dead camera means blind spots, missed motion alerts, and potential security risks. Whether you’re using your camera for front door monitoring, backyard surveillance, or keeping an eye on pets while you’re away, staying informed about battery status helps you act before it’s too late.

In this comprehensive guide, you’ll learn multiple ways to check your Eufy camera’s battery life, from using the EufySecurity app to interpreting LED signals. We’ll also cover practical tips to extend battery life, troubleshoot common issues, and set up smart alerts so you’re never caught off guard. By the end, you’ll be a pro at managing your Eufy camera’s power like a true security expert.

Understanding Your Eufy Camera’s Battery System

Before diving into how to check battery life on Eufy camera, it’s helpful to understand how these cameras are powered and what affects their battery performance.

Most Eufy wireless cameras use rechargeable lithium-ion batteries, which are known for their long life and consistent power output. Models like the EufyCam 2 and EufyCam 2C come with built-in batteries that can last anywhere from 180 days to a full year on a single charge, depending on usage. Solar-powered versions, such as the Eufy SoloCam S40, can extend this even further with regular sunlight exposure.

The battery life depends on several factors:
– How often the camera detects motion
– Video resolution and recording length
– Frequency of live view usage
– Environmental conditions (extreme cold or heat can reduce efficiency)

Because of this variability, it’s essential to monitor your camera’s battery regularly. Fortunately, Eufy has designed intuitive tools to help you do just that—starting with their official app.

How to Check Battery Life Using the EufySecurity App

The EufySecurity app is your central hub for managing all Eufy devices, and it’s the most reliable way to check battery life on Eufy camera. Available for both iOS and Android, the app provides real-time updates, detailed analytics, and easy access to settings.

Step 1: Download and Open the EufySecurity App

If you haven’t already, download the EufySecurity app from the Apple App Store or Google Play Store. Make sure you’re using the latest version to access all features and bug fixes.

Once installed, open the app and log in with your Eufy account. If you don’t have an account, create one—it’s free and only takes a minute. Your account syncs all your devices and stores your settings securely in the cloud.

Step 2: Select Your Camera from the Device List

After logging in, you’ll see a dashboard showing all your connected Eufy devices. Tap on the camera you want to check. The app will load the live feed and device details.

Look for a section labeled “Device Info,” “Status,” or “Battery.” This is where the current battery percentage is displayed. For example, you might see “Battery: 78%” right below the camera name.

Step 3: View Detailed Battery Information

Tap on the battery percentage or the “i” (information) icon next to it to see more details. The app may show:
– Estimated days of remaining battery life
– Last charging date
– Average daily power consumption

This data helps you understand usage patterns and plan recharging schedules. For instance, if your camera uses 5% per day, and it’s at 50%, you know you have about 10 days before it needs a charge.

Step 4: Enable Battery Notifications

To avoid surprise power losses, set up battery alerts. Go to:
– Device Settings > Notifications > Battery Alerts

Choose a threshold—like 20% or 30%—and the app will send you a push notification when the battery drops below that level. You can also enable email alerts if you prefer.

This feature is especially useful if you’re away from home or have multiple cameras to manage.

Checking Battery Life via the Camera’s LED Indicator

Not all Eufy cameras have a screen, but many use LED lights to communicate status—including battery life. If you’re near your camera, this is a quick way to check without opening the app.

Understanding LED Colors and Patterns

Different Eufy models use slightly different LED systems, but here’s a general guide:

– Solid Green: Camera is powered on and functioning normally. Battery is likely above 50%.
– Blinking Green: Camera is charging or in setup mode.
– Solid Red: Low battery (usually below 20%). Time to recharge.
– Blinking Red: Battery is critically low or there’s a charging error.
– Blue or White (on some models): Wi-Fi connection in progress or firmware update.

For example, the EufyCam 2C flashes red when the battery drops below 20%, giving you a visual cue to plug it in.

How to Interpret LED Signals

If your camera’s LED is red, don’t panic—just recharge it soon. But if it’s blinking red repeatedly, it might indicate a charging issue. Try using a different USB cable or power adapter, or clean the charging port with a dry cloth.

Note: Some indoor models like the Eufy Indoor Cam 2K don’t have LED indicators for battery, as they’re usually plugged in. But for outdoor and wireless models, the LED is a helpful backup method.

Using the Eufy Web Portal to Monitor Battery

If you prefer managing devices from a computer, Eufy offers a web portal at my.eufylife.com. This is a great alternative if your phone battery is low or you’re working at a desk.

Step 1: Log In to Your Eufy Account

Go to the website and sign in with the same credentials you use in the app. You’ll see a dashboard similar to the mobile version.

Step 2: Navigate to Device Management

Click on “Security” in the top menu, then select your camera from the list. The device page will show battery level, signal strength, and recent activity.

Step 3: Review Battery History

Some Eufy models allow you to view battery usage over time. Look for a graph or chart showing daily consumption. This helps you spot trends—like increased usage during vacation mode or after adjusting motion zones.

While the web portal doesn’t offer as many customization options as the app, it’s perfect for quick checks and monitoring multiple cameras at once.

Tips to Extend Your Eufy Camera’s Battery Life

Knowing how to check battery life on Eufy camera is only half the battle. The other half is making that battery last as long as possible. With a few smart adjustments, you can significantly extend usage between charges.

1. Adjust Motion Detection Sensitivity

High sensitivity means your camera triggers more often—even for leaves blowing or shadows. This drains the battery faster.

Go to:
– Device Settings > Motion Detection > Sensitivity

Set it to “Medium” or “Low” if you’re in a quiet area. You can also create custom motion zones to focus only on important areas like driveways or front doors.

2. Reduce Video Quality and Recording Length

Higher resolution (like 2K or 4K) uses more power. If you don’t need ultra-clear footage, switch to 1080p.

Also, shorten the recording duration:
– Device Settings > Recording > Recording Length

Choose 10 or 15 seconds instead of 30. This reduces how long the camera stays active after detecting motion.

3. Limit Live View Usage

Streaming live video is one of the biggest battery drains. Only use live view when necessary—like checking on a package delivery or confirming an alert.

If you frequently check your camera, consider setting up activity zones and alerts so you’re only notified when something important happens.

4. Use Solar Panels (If Available)

For compatible models like the Eufy SoloCam S40, adding a solar panel can keep your camera charged with minimal effort. Just mount the panel in a sunny spot and connect it to the camera.

Even a few hours of sunlight per day can extend battery life indefinitely, making manual recharging rare.

5. Schedule “Sleep” or “Away” Modes

Some Eufy cameras support scheduling. Set your camera to “Away” mode when you’re on vacation or “Sleep” during nighttime if you don’t need 24/7 monitoring.

This reduces unnecessary recordings and saves power.

6. Keep Firmware Updated

Eufy regularly releases firmware updates that improve battery efficiency and fix bugs. To update:
– Device Settings > Firmware Update

Enable auto-updates if available, or check monthly for new versions.

Troubleshooting Common Battery Issues

Even with the best care, you might run into battery problems. Here’s how to fix the most common issues.

Battery Drains Too Fast

If your camera loses power in just a few weeks, check:
– Motion detection settings (too sensitive?)
– Frequent live view usage
– Extreme weather (cold reduces battery efficiency)
– Old or damaged battery (after 2–3 years, batteries degrade)

Try resetting the camera and re-syncing it with the app. If the problem persists, contact Eufy support.

Battery Percentage Doesn’t Update

Sometimes the app shows an outdated battery level. This can happen after a firmware update or app glitch.

Fix it by:
1. Force-closing the EufySecurity app
2. Reopening it and refreshing the device list
3. Tapping the camera to reload data

If that doesn’t work, restart the camera by removing and reinserting the battery (if removable) or power-cycling it.

Camera Won’t Charge

If your camera isn’t charging:
– Use the original USB cable and a 5V/2A adapter
– Clean the charging port with a dry toothbrush
– Try a different power source (wall outlet vs. computer USB)
– Check for physical damage to the battery or port

If the camera still won’t charge, the battery may need replacement. Eufy offers replacement batteries for most models.

False Low Battery Alerts

Occasionally, the app may send a low battery alert even when the camera has plenty of power. This is usually a sync issue.

To fix:
– Re-sync the camera with the app
– Update the app and firmware
– Reboot your Wi-Fi router (poor connection can delay updates)

Best Practices for Long-Term Battery Health

To keep your Eufy camera running smoothly for years, follow these best practices:

– Recharge before 20%: Don’t let the battery die completely. Lithium-ion batteries last longer when kept between 20% and 80%.
– Store properly: If not using the camera for a long time, store it with a 50% charge in a cool, dry place.
– Avoid extreme temperatures: Don’t leave your camera in a hot car or freezing garage. Ideal operating range is 32°F to 104°F (0°C to 40°C).
– Clean regularly: Dust and dirt can block sensors and charging ports. Wipe the camera with a soft, dry cloth monthly.

Conclusion: Stay Powered, Stay Protected

Learning how to check battery life on Eufy camera is a simple but essential skill for any smart home owner. With the EufySecurity app, LED indicators, and web portal, you have multiple tools to monitor power levels and stay ahead of low-battery surprises.

By adjusting settings, enabling alerts, and following best practices, you can maximize battery life and ensure your camera is always ready to protect your home. Whether you’re using a wireless EufyCam or a solar-powered SoloCam, staying informed means staying secure.

Don’t wait until your camera goes dark—start checking your battery today. A few minutes of attention now can save you from a security gap later. With this guide, you’re equipped to manage your Eufy camera like a pro.