How to Clean Eufy

Keeping your Eufy smart home devices clean ensures optimal performance, longer lifespan, and better hygiene. This guide walks you through safe cleaning methods for vacuums, robot mops, security cameras, and more—without damaging sensitive components.

Key Takeaways

• Unplug before cleaning: Always disconnect your Eufy device from power or remove the battery to prevent electrical hazards.
• Use gentle tools: Microfiber cloths, soft brushes, and compressed air are ideal—avoid abrasive materials that can scratch surfaces.
• Clean filters regularly: Dirty filters reduce suction and efficiency; rinse or replace them every 1–2 months depending on usage.
• Wipe sensors carefully: Camera lenses and motion sensors must stay clear for accurate detection—use lens-safe wipes only.
• Empty dustbins after each use: Prevents clogs, odors, and strain on the motor in robot vacuums and mops.
• Avoid water near electronics: Never submerge charging docks, cameras, or control panels—moisture causes irreversible damage.
• Schedule routine maintenance: Set monthly reminders to inspect brushes, wheels, and charging contacts for debris buildup.

How to Clean Eufy: A Complete Step-by-Step Guide

Keeping your Eufy smart home devices in top condition isn’t just about aesthetics—it’s essential for performance, safety, and longevity. Whether you own a Eufy RoboVac, RoboMop, indoor or outdoor security camera, doorbell, or pet feeder, regular cleaning prevents malfunctions, extends battery life, and ensures your devices work as intended. Dust, pet hair, grease, and moisture can accumulate quickly, especially in high-traffic areas or outdoor environments.

In this comprehensive guide, you’ll learn exactly how to clean Eufy devices safely and effectively. We’ll cover everything from daily maintenance routines to deep-cleaning procedures, tailored to specific product types. You’ll also get practical tips on what tools to use (and what to avoid), how often to clean, and how to troubleshoot common issues that arise from neglect. By the end, you’ll have a clear cleaning schedule and the confidence to keep your Eufy ecosystem running smoothly.

Let’s dive in!

Why Cleaning Your Eufy Devices Matters

Eufy devices are designed to make your life easier—but they can’t do their job if they’re clogged, dirty, or malfunctioning. For example, a robot vacuum with a full dustbin or tangled brush roll won’t pick up debris efficiently. A security camera covered in spiderwebs or grime might miss critical motion events. Even smart locks can become stiff or unresponsive if dirt builds up around the mechanism.

Regular cleaning also prevents long-term damage. Dust and moisture can corrode internal components, while pet hair can wrap around motors and cause overheating. Plus, clean devices look better and contribute to a healthier home environment—especially important if you have allergies or pets.

Think of cleaning your Eufy devices like changing the oil in your car: it’s a small investment of time that pays big dividends in reliability and lifespan.

General Cleaning Safety Tips

Before we get into device-specific instructions, let’s cover some universal safety rules:

• Always power off and unplug: Whether it’s a robot vacuum or a wired security camera, disconnect it from power before cleaning. For battery-powered devices like the RoboVac, remove the battery if possible.
• Never use harsh chemicals: Avoid bleach, ammonia, or abrasive cleaners. These can degrade plastic, rubber, and electronic components. Stick to mild soap, water, or isopropyl alcohol (70% or less).
• Keep water away from electronics: Do not spray liquids directly onto devices. Instead, dampen a cloth and wipe gently. Never submerge any part of your Eufy device unless explicitly stated in the manual (e.g., washable filters).
• Use the right tools: Microfiber cloths, soft-bristle brushes, cotton swabs, and compressed air are your best friends. Avoid steel wool, paper towels (which can scratch), or anything that generates static.
• Work in a dry, well-lit area: This helps you see debris clearly and reduces the risk of slipping or mishandling small parts.

Following these guidelines will protect both you and your devices during the cleaning process.

How to Clean Eufy Robot Vacuums (RoboVac Series)

Eufy’s RoboVac lineup—including models like the RoboVac 11S, G30, and L70—is popular for its quiet operation and strong suction. But to maintain peak performance, these robots need regular attention.

Step 1: Empty the Dustbin

After every cleaning cycle (or at least once a week), remove the dustbin from the back of the robot. Hold it over a trash can and press the release button to open the bottom flap. Tap gently to dislodge stuck debris. For stubborn dirt, use a dry brush or toothpick—never your fingers.

Pro tip: Rinse the dustbin with warm water once a month if your model allows it (check the manual). Let it air-dry completely before reinserting.

Step 2: Clean the Filters

The HEPA or foam filter traps fine dust and allergens. Over time, it clogs and reduces suction. Remove the filter from the dustbin and tap it gently to remove loose dust. If it’s washable (most Eufy models are), rinse it under lukewarm water. Do not use soap—it can degrade the filter material.

Let the filter dry for at least 24 hours in a shaded, ventilated area. Never reinstall a damp filter—it can promote mold growth and damage the motor.

Replace non-washable filters every 2–3 months, or sooner if you have pets or allergies.

Step 3: Clean the Brush Roll and Side Brushes

Flip the robot over and locate the main brush roll (center) and side brushes (corners). Use scissors or a seam ripper to carefully cut away hair and string wrapped around the rollers. Pull out any embedded debris.

For the side brushes, unscrew the small bolt (usually with a coin or screwdriver) and remove the brush. Rinse it under water if needed, then dry thoroughly before reattaching.

Inspect the brush bearings for stiffness—if they don’t spin freely, clean them with a dry cloth.

Step 4: Wipe Sensors and Charging Contacts

Eufy robots rely on cliff sensors, wall sensors, and charging pins to navigate and recharge. Use a dry microfiber cloth to gently wipe these areas. For sticky residue, lightly dampen the cloth with water or isopropyl alcohol.

Avoid touching the sensors with your fingers—oils from skin can interfere with readings.

Step 5: Clean the Wheels and Bumper

Debris can get stuck in the wheel wells or under the front bumper. Use a toothbrush or cotton swab to remove dirt. Rotate the wheels by hand to check for smooth movement.

If the bumper feels sticky or unresponsive, wipe it with a slightly damp cloth.

How to Clean Eufy Robot Mops (RoboMop Series)

Models like the RoboMop R10 and T20 combine vacuuming and mopping. While they share many cleaning steps with RoboVacs, mopping components require extra care.

Step 1: Empty and Rinse the Water Tank

After each use, empty any remaining water from the tank. Rinse it with clean water to prevent mold or mineral buildup—especially if you use tap water.

Let the tank air-dry upside down before storing.

Note: Never add cleaning solutions unless approved by Eufy. Most models are designed for plain water only.

Step 2: Wash the Mopping Pad

Remove the reusable mopping pad (or dispose of disposable ones). Machine-wash reusable pads in cold water with mild detergent. Avoid fabric softeners—they reduce absorbency.

Air-dry completely. Damp pads can grow bacteria and leave streaks.

Step 3: Clean the Mop Holder and Spray Nozzles

Wipe the mop attachment plate with a damp cloth. Check the spray nozzles for clogs—use a pin or needle to clear any blockages if water isn’t dispensing properly.

Step 4: Follow RoboVac Cleaning Steps

Since RoboMops also vacuum, repeat all steps from the RoboVac section: empty the dustbin, clean filters, and inspect brushes and sensors.

How to Clean Eufy Security Cameras

Eufy offers indoor, outdoor, and doorbell cameras—all of which need periodic cleaning to ensure clear video and reliable motion detection.

Indoor Cameras (e.g., Indoor Cam C16, E22)

• Power off the camera and unplug it.
• Use a microfiber cloth to wipe the lens gently. For smudges, lightly dampen the cloth with lens cleaner or isopropyl alcohol.
• Clean the housing with a dry cloth. Avoid getting moisture near the microphone or speaker grilles.
• Check the mounting bracket for dust—wipe with a dry brush if needed.

Outdoor Cameras (e.g., SoloCam S40, Floodlight Cam)

Outdoor models face rain, dust, pollen, and insects. Clean them monthly or after storms.

• Turn off power at the breaker for wired models. For battery-powered cams, remove the battery.
• Use a soft brush to remove cobwebs or debris from the housing.
• Wipe the lens with a lens-safe wipe or microfiber cloth. Never use window cleaner—it can damage coatings.
• Inspect the PIR (motion) sensor window—keep it clear for accurate detection.
• Check seals and gaskets for cracks or wear that could let moisture in.

Doorbell Cameras (e.g., Video Doorbell 2K)

• Turn off power at the breaker.
• Remove the faceplate (if removable) and wipe the lens and sensor areas.
• Use compressed air to blow dust out of the speaker and microphone ports.
• Reattach securely to prevent water ingress.

Important: Never spray water directly on outdoor cameras—even if they’re weatherproof. Always wipe gently.

How to Clean Eufy Smart Locks and Doorbells

Smart locks (like the Smart Lock Touch) and video doorbells have mechanical parts that can jam if dirty.

Smart Locks

• Wipe the exterior with a dry or slightly damp microfiber cloth.
• Use a cotton swab dipped in isopropyl alcohol to clean the fingerprint sensor—avoid excess liquid.
• Lubricate the deadbolt mechanism annually with graphite powder (not oil, which attracts dust).
• Check the keyhole for debris if you use physical keys.

Video Doorbells

Follow the same steps as outdoor cameras. Pay special attention to the motion sensor and night vision LEDs—keep them unobstructed.

How to Clean Eufy Pet Feeders and Other Accessories

Eufy’s smart pet feeders (like the SmartFeeder) require food-safe cleaning.

Pet Feeders

• Unplug and remove the food hopper and bowl.
• Wash the bowl with warm, soapy water. Rinse thoroughly.
• Wipe the hopper with a damp cloth—do not submerge.
• Clean the dispensing mechanism with a dry brush to remove kibble dust.
• Let all parts dry completely before reassembling.

For other accessories like the Eufy HomeBase or charging docks, simply wipe with a dry cloth. Avoid liquids near ports.

Troubleshooting Common Cleaning Issues

Even with proper care, problems can arise. Here’s how to handle them:

• Robot won’t charge after cleaning: Check that charging contacts are dry and free of debris. Re-seat the robot on the dock firmly.
• Camera image is blurry: Clean the lens again with a fresh microfiber cloth. Ensure no fingerprints or smudges remain.
• Reduced suction in RoboVac: Confirm the filter is dry and properly seated. Check for blockages in the air path.
• Water leaking from RoboMop: Ensure the water tank is sealed correctly and the mop pad isn’t oversaturated.
• Smart lock unresponsive: Clean the fingerprint sensor and check battery levels. Reset if needed.

If issues persist, consult the Eufy support page or contact customer service.

Creating a Cleaning Schedule

Consistency is key. Here’s a simple maintenance calendar:

• Daily: Empty RoboVac/RoboMop dustbin.
• Weekly: Wipe camera lenses, clean brush rolls, check filters.
• Monthly: Deep-clean filters, inspect wheels and sensors, clean water tanks.
• Quarterly: Replace filters, lubricate locks, check outdoor camera seals.

Set phone reminders or add these tasks to your household chore list.

Final Thoughts

Cleaning your Eufy devices doesn’t have to be time-consuming or complicated. With the right tools and a little routine, you’ll keep your smart home running efficiently for years. Remember: gentle care goes a long way. Avoid shortcuts like using paper towels or harsh sprays—they may save time now but cost you in repairs later.

By following this guide, you’re not just maintaining your devices—you’re protecting your investment and ensuring your home stays safe, clean, and connected. So grab that microfiber cloth, unplug your robot, and give your Eufy the TLC it deserves.