How to Clean Eufy X10 Filter

Keeping your Eufy X10 robot vacuum in top shape starts with regular filter cleaning. This guide walks you through the complete process—from removing the filter to reassembling your device—so you can maintain suction power, extend filter life, and improve air quality at home.

Key Takeaways

• Clean the filter every 2–4 weeks to maintain strong suction and prevent clogs.
• Always use cold water and mild soap—never machine wash or use harsh chemicals.
• Let the filter dry completely for 24 hours before reinstalling to avoid mold or damage.
• Inspect the filter for wear and tear during cleaning—replace if torn or overly dirty.
• Clean the filter housing and brush roll at the same time for best performance.
• Use compressed air for stubborn dust if rinsing isn’t enough.
• Store a spare filter to swap during cleaning and reduce downtime.

Introduction: Why Cleaning Your Eufy X10 Filter Matters

If you own a Eufy X10 robot vacuum, you already know how convenient and efficient it is at keeping your floors spotless. But like any high-performance appliance, it needs regular maintenance to keep working at its best. One of the most important—and often overlooked—tasks is cleaning the filter.

The Eufy X10 uses a high-efficiency washable filter to trap dust, pet hair, allergens, and fine particles. Over time, this filter gets clogged with debris, which reduces suction power, increases motor strain, and can even release dust back into the air. That’s why learning how to clean the Eufy X10 filter properly is essential for both performance and longevity.

In this complete guide, you’ll learn everything you need to know about cleaning your Eufy X10 filter—step by step. We’ll cover when to clean it, how to remove and wash it safely, drying tips, and how to spot when it’s time for a replacement. Plus, we’ll share expert tips to keep your vacuum running like new, even with daily use.

Whether you’re a first-time Eufy owner or just need a refresher, this guide will make filter maintenance simple, fast, and effective.

What You’ll Need to Clean the Eufy X10 Filter

Before you start, gather these supplies to make the process quick and mess-free:

• Your Eufy X10 robot vacuum
• A sink or basin
• Cold water (never hot—it can warp the filter)
• Mild dish soap (optional, for deep cleaning)
• A soft-bristled toothbrush or small cleaning brush
• A clean, dry towel
• Compressed air (optional, for stubborn dust)
• A well-ventilated drying area (like a windowsill or countertop)

Having everything ready beforehand saves time and prevents frustration. Avoid using bleach, ammonia, or any abrasive cleaners—they can damage the filter’s delicate mesh and reduce its effectiveness.

Step 1: Turn Off and Prepare Your Eufy X10

Safety first! Before handling any part of your robot vacuum, make sure it’s completely powered off.

Power Down the Vacuum

Press and hold the power button on your Eufy X10 until it shuts down. If it’s docked, unplug the charging base or remove the vacuum from the dock. This prevents accidental activation during cleaning.

Remove the Dustbin

Locate the dustbin on the top or side of your Eufy X10 (depending on the model). Gently press the release button and pull the bin straight out. Empty the contents into a trash can. Tap it lightly to dislodge any stuck debris.

Inspect the Dustbin and Cyclone

While the bin is out, take a quick look inside. Wipe it with a dry cloth or rinse it under cold water if needed. Let it air dry completely before reinserting. A clean dustbin helps the filter work more efficiently.

Step 2: Remove the Filter from the Eufy X10

Now it’s time to access the filter. The Eufy X10 uses a HEPA-style washable filter located inside the dustbin compartment.

Open the Filter Compartment

With the dustbin removed, look for a small latch or cover on the inside of the bin. On most Eufy X10 models, this is a rectangular panel with a small tab. Press the tab and lift the cover open.

Gently Pull Out the Filter

The filter is a rectangular, pleated mesh piece that fits snugly inside. Use your fingers to carefully pull it straight out. Avoid twisting or forcing it—this can tear the material.

Check for Debris Around the Filter

While the filter is out, look around the housing for any trapped hair, dust, or lint. Use a dry toothbrush or compressed air to clean the area. A clean filter slot ensures better airflow when you reinstall.

Step 3: Rinse the Filter Thoroughly

Now comes the most important part: cleaning the filter itself. Proper rinsing removes trapped particles without damaging the mesh.

Rinse Under Cold Running Water

Hold the filter under a gentle stream of cold water. Let the water flow through the filter from the clean side (the side that faces outward when installed) to the dirty side. This helps push debris out without compacting it.

Use Mild Soap for Deep Cleaning (Optional)

If the filter is particularly dirty or smells musty, add a drop of mild dish soap to your hands and gently rub the filter. Focus on the pleats where dust accumulates. Avoid scrubbing too hard—this can damage the fine fibers.

Use a Soft Brush for Stubborn Grime

For caked-on dust or pet hair, use a soft-bristled toothbrush. Gently brush along the pleats in one direction. Don’t press too hard—think of it like brushing your hair, not scrubbing a pan.

Rinse Until Water Runs Clear

Continue rinsing until no soap bubbles remain and the water runs clear. This ensures no residue is left behind, which could affect performance or cause odors.

Step 4: Dry the Filter Completely

Drying is just as important as cleaning. A damp filter can grow mold, warp, or damage your vacuum’s motor.

Shake Off Excess Water

After rinsing, gently shake the filter to remove excess water. Don’t wring or twist it—this can tear the mesh.

Pat Dry with a Clean Towel

Lay the filter on a clean, dry towel and pat it gently. Absorb as much moisture as possible without rubbing.

Air Dry in a Well-Ventilated Area

Place the filter on a dry towel or rack in a warm, airy spot. Avoid direct sunlight or heat sources like radiators—they can warp the material. Let it dry for at least 24 hours.

Check for Complete Dryness

Before reinstalling, make sure the filter is 100% dry. Run your fingers through the pleats—there should be no dampness or cool spots. Installing a wet filter can lead to mold, odors, or motor damage.

Step 5: Reinstall the Filter and Reassemble

Once the filter is dry, it’s time to put everything back together.

Insert the Filter Correctly

Place the filter back into the dustbin compartment with the clean side facing outward. Make sure it sits flat and fits snugly. Don’t force it—if it doesn’t slide in easily, check the orientation.

Close the Filter Cover

Snap the filter cover back into place. You should hear a soft click when it’s secure.

Reinsert the Dustbin

Slide the dustbin back into the Eufy X10 until it locks in place. Make sure it’s fully seated—otherwise, the vacuum may not start or could leak dust.

Test the Vacuum

Power on your Eufy X10 and run a short cleaning cycle. Listen for strong suction and check that no dust escapes. If everything sounds and looks good, you’re all set!

How Often Should You Clean the Eufy X10 Filter?

The frequency depends on how much you use your vacuum and your home environment.

• Light use (1–2 times per week): Clean the filter every 4 weeks.
• Moderate use (3–5 times per week): Clean every 2–3 weeks.
• Heavy use (daily, pets, allergies): Clean every 1–2 weeks.

If you notice reduced suction, louder motor noise, or dust escaping, it’s time to clean the filter—even if it hasn’t been the full interval. Regular cleaning prevents buildup and keeps your vacuum efficient.

Tips for Maintaining Your Eufy X10 Filter

A little extra care goes a long way in extending the life of your filter.

Use Compressed Air for Quick Cleanups

Between deep cleans, use compressed air to blow dust out of the filter. Hold the can upright and spray in short bursts. This is great for weekly maintenance.

Keep a Spare Filter on Hand

Buy an extra Eufy X10 filter and rotate them. While one dries, use the other. This reduces downtime and ensures your vacuum is always ready.

Clean the Brush Roll and Sensors

While you’re maintaining the filter, take a minute to clean the main brush roll and sensors. Hair and debris can affect performance and cause the vacuum to get stuck.

Store the Vacuum Properly

Keep your Eufy X10 in a dry, cool place. Avoid humid areas like basements, which can promote mold growth in the filter.

Replace the Filter When Needed

Even with perfect care, filters wear out. Replace your Eufy X10 filter every 6–12 months, or sooner if it’s torn, smells bad, or no longer traps dust effectively.

Troubleshooting Common Filter Issues

Sometimes, cleaning alone isn’t enough. Here’s how to fix common problems.

Reduced Suction After Cleaning

If suction is still weak, double-check that the filter is fully dry and installed correctly. Also, inspect the dustbin, cyclone, and air path for blockages.

Filter Smells Musty or Moldy

This usually means it wasn’t dried properly. Remove the filter, rinse it again, and dry it for 48 hours in a well-ventilated area. Consider replacing it if the smell persists.

Filter Tears or Rips

Don’t try to repair a damaged filter. Order a replacement from Eufy or an authorized retailer. A torn filter won’t trap particles effectively.

Vacuum Won’t Start After Reassembly

Check that the dustbin and filter are properly seated. The Eufy X10 has safety sensors that prevent operation if parts are missing or misaligned.

Conclusion: Keep Your Eufy X10 Running Like New

Cleaning your Eufy X10 filter might seem like a small task, but it has a big impact on performance, air quality, and the lifespan of your vacuum. By following this guide, you’ll ensure your robot vacuum stays powerful, efficient, and reliable for years to come.

Remember: clean the filter every 2–4 weeks, rinse with cold water, dry completely, and replace when needed. Pair filter maintenance with regular cleaning of the dustbin, brush roll, and sensors for the best results.

With just a few minutes of care each month, you’ll enjoy cleaner floors, fresher air, and a vacuum that works smarter—not harder. So grab your supplies, follow these steps, and give your Eufy X10 the TLC it deserves.