How to Clean Eufy X10 Pro

Keeping your Eufy X10 Pro clean ensures peak suction power, longer battery life, and fewer maintenance issues. This guide walks you through a complete cleaning routine, from emptying the dustbin to maintaining sensors and brushes, so your robot vacuum runs smoothly for years.

Key Takeaways

• Clean the dustbin after every use: Prevents clogs and maintains strong suction by removing dust and debris buildup.
• Wash filters monthly: Rinse the HEPA filter under water and let it dry completely to avoid mold and odor.
• Remove hair from brushes weekly: Use the cleaning tool to cut and pull tangled hair from the main and side brushes.
• Wipe sensors and charging contacts: Use a dry microfiber cloth to keep navigation and charging systems working properly.
• Check wheels and vents for blockages: Clear debris from wheels and airflow paths to prevent motor strain.
• Store in a dry, cool place: Protects internal components and extends the lifespan of your Eufy X10 Pro.
• Reset maintenance reminders: Use the app to track cleaning cycles and stay on top of upkeep.

How to Clean Eufy X10 Pro: A Complete Maintenance Guide

If you’ve invested in the Eufy X10 Pro robot vacuum, you already know it’s a smart, powerful cleaning companion. But like any high-performance device, it needs regular care to keep working at its best. Over time, dust, hair, and debris can build up in critical areas, reducing suction, confusing sensors, and even shortening the vacuum’s lifespan.

The good news? Cleaning your Eufy X10 Pro is simple, quick, and only takes a few minutes each week. In this guide, we’ll walk you through a complete cleaning routine—step by step—so your robot vacuum stays efficient, hygienic, and ready to tackle every mess. Whether you’re a first-time owner or just looking to improve your maintenance habits, this guide covers everything you need to know to clean your Eufy X10 Pro like a pro.

By the end, you’ll know exactly how to empty the dustbin, clean the brushes, maintain the filters, and keep sensors and wheels in top shape. Plus, we’ll share troubleshooting tips and app-based reminders to make upkeep effortless. Let’s get started!

Why Regular Cleaning Matters

Before diving into the steps, it’s important to understand why cleaning your Eufy X10 Pro matters. This isn’t just about appearances—it’s about performance, hygiene, and longevity.

When dust and debris accumulate in the dustbin or clog the filters, suction power drops. That means your robot won’t pick up dirt as effectively, leaving your floors less clean. Hair wrapped around the brushes can cause them to spin unevenly or stop altogether, leading to missed spots or even motor strain. Dirty sensors can misread your home’s layout, causing the vacuum to get stuck or miss entire rooms.

And if you neglect the charging contacts or wheels, you might face charging issues or navigation errors. Over time, these small problems add up, potentially shortening the life of your Eufy X10 Pro.

Regular cleaning prevents these issues. It keeps your vacuum running smoothly, extends battery life, and ensures consistent cleaning results. Think of it like changing the oil in your car—small efforts now save big repairs later.

What You’ll Need

Before you begin, gather these simple tools. Most are probably already in your home:

• A soft, dry microfiber cloth
• A small brush (like an old toothbrush)
• Scissors or the included cleaning tool
• Mild soap and water (for filters only)
• A dry towel
• Compressed air (optional, for hard-to-reach areas)

Avoid using harsh chemicals, bleach, or abrasive scrubbers. These can damage plastic parts, sensors, or filters. Stick to gentle cleaning methods to protect your Eufy X10 Pro.

Step 1: Empty the Dustbin

The dustbin is the first thing you should clean—and it’s also the most frequent task. For best results, empty it after every cleaning cycle.

How to Remove the Dustbin

Press the release button on the top of the Eufy X10 Pro and gently pull the dustbin straight out. It should slide out smoothly. If it feels stuck, double-check that the button is fully pressed.

Empty the Contents

Hold the dustbin over a trash can and press the release latch to open the bottom lid. Tap it gently to dislodge any stuck debris. Avoid shaking too hard—this can send fine dust back into the air.

Inspect for Clogs

Look inside the dustbin and the intake port (where dirt enters the vacuum). If you see clumps of hair, paper, or sticky residue, use the small brush to loosen them. For stubborn gunk, a toothpick or compressed air can help.

Wipe the Dustbin

Use a dry microfiber cloth to wipe the inside and outside of the dustbin. If it’s very dirty, you can rinse it with water—but make sure it’s completely dry before reinserting. Never put a wet dustbin back into the vacuum.

Reinsert the Dustbin

Slide the clean, dry dustbin back into place until it clicks. Make sure it’s fully seated to avoid suction leaks.

Step 2: Clean the Filters

The Eufy X10 Pro uses a HEPA filter to trap fine particles like pollen, pet dander, and dust mites. Over time, this filter gets clogged, reducing airflow and suction. Cleaning it regularly keeps your air cleaner and your vacuum stronger.

Remove the Filter

Open the dustbin compartment and locate the filter—it’s a rectangular foam-like piece inside a plastic frame. Gently pull it out.

Rinse the Filter

Hold the filter under lukewarm running water. Rinse it gently until the water runs clear. Do not twist or wring the filter—this can damage the delicate fibers.

Let It Dry Completely

Place the filter on a dry towel and let it air dry for at least 24 hours. Never use a hair dryer, heater, or direct sunlight to speed up drying. Heat can warp the filter and reduce its effectiveness.

Reinstall the Filter

Once completely dry, place the filter back into its housing and reinsert it into the dustbin. Make sure it fits snugly with no gaps.

Filter Replacement Tip

Even with regular cleaning, filters wear out over time. Eufy recommends replacing the HEPA filter every 3 to 6 months, depending on usage. If you have pets or allergies, consider replacing it more often.

Step 3: Clean the Brushes

The Eufy X10 Pro has two types of brushes: the main roller brush and two side brushes. Both collect hair, string, and debris, which can wrap around the axles and reduce performance. Cleaning them weekly prevents jams and keeps your vacuum moving smoothly.

Remove the Main Brush

Flip the vacuum over and locate the main brush cover on the bottom. Use a coin or screwdriver to turn the two screws counterclockwise and lift off the cover. Pull the brush straight out.

Cut Away Hair and Debris

Use the included cleaning tool (or scissors) to carefully cut through any hair or string wrapped around the brush. Pull the debris away from the rollers and ends. Be thorough—even small tangles can affect rotation.

Clean the Brush Housing

Use a dry cloth or small brush to wipe out the brush compartment. Remove any dust or hair stuck in the grooves or around the motor shaft.

Reinstall the Main Brush

Slide the clean brush back into place, making sure it spins freely. Replace the cover and tighten the screws securely.

Clean the Side Brushes

The side brushes (small rotating brushes on the front corners) also collect hair. Unscrew the center bolt (usually with a coin) and remove the brush. Cut away any tangled hair, then wipe the brush and mounting area clean. Reattach and tighten the bolt.

Test the Brushes

Turn on the vacuum and let it run for a few seconds. Listen for smooth rotation. If you hear grinding or see uneven movement, double-check that the brushes are properly installed and free of debris.

Step 4: Wipe the Sensors and Cameras

The Eufy X10 Pro uses advanced navigation, including a top-mounted camera and multiple sensors, to map your home and avoid obstacles. Dust or smudges on these components can cause navigation errors, missed spots, or random movements.

Locate the Sensors

The main camera is on the top of the vacuum, near the front. You’ll also find cliff sensors on the bottom (near the wheels) and bumper sensors on the front edge.

Clean with a Microfiber Cloth

Gently wipe the camera lens and all sensor surfaces with a dry, soft microfiber cloth. Do not use water or cleaning sprays—moisture can damage electronics.

Check for Obstructions

Make sure nothing is blocking the sensors, like stickers, tape, or dust buildup. Even a small smudge on the camera can confuse the vacuum’s mapping system.

Tip for Smudges

If the camera lens has fingerprints or smudges, breathe lightly on it (like cleaning glasses) and wipe again with the cloth. This adds a tiny bit of moisture without risking damage.

Step 5: Clean the Wheels and Vents

The wheels and airflow vents are often overlooked, but they’re essential for movement and suction. Debris stuck in the wheels can cause jerky movement or prevent the vacuum from returning to its dock. Clogged vents reduce airflow and strain the motor.

Inspect the Main Wheels

Flip the vacuum over and check the two large wheels on either side. Look for hair, string, or dirt wrapped around the axles.

Remove Debris

Use the small brush or your fingers to pull away any tangled material. For tight spots, a toothpick or tweezers can help.

Clean the Caster Wheel

The small front caster wheel also collects debris. Spin it manually and wipe it clean. If it doesn’t spin freely, remove it (if possible) and clean the axle.

Check the Air Vents

Look at the side and rear vents where air exits the vacuum. Use compressed air or a dry brush to blow out dust and lint. Never insert anything sharp into the vents.

Tip for Pet Owners

If you have pets, check the wheels and vents weekly. Pet hair loves to wrap around moving parts.

Step 6: Clean the Charging Contacts

The Eufy X10 Pro charges automatically when it docks, but dirty charging contacts can prevent a proper connection. This leads to incomplete charging, shorter run times, or failure to return to the dock.

Locate the Contacts

On the bottom of the vacuum, you’ll see two metal charging pins near the rear wheels. The dock also has corresponding contacts.

Wipe with a Dry Cloth

Use a dry microfiber cloth to gently wipe both the vacuum’s contacts and the dock’s contacts. Remove any dust, hair, or residue.

Use Compressed Air (Optional)

If debris is stuck in the dock’s contact slots, use a short burst of compressed air to blow it out.

Check Connection

After cleaning, place the vacuum on the dock and ensure it charges. The indicator light should turn solid or show a charging animation.

Step 7: Maintain the Docking Station

The dock isn’t just a charger—it’s also a storage hub and sometimes a dustbin emptying station (if you have the auto-empty version). Keeping it clean ensures reliable performance.

Wipe the Surface

Use a damp cloth to wipe down the dock’s top and sides. Avoid getting water inside the electronics.

Clear the Air Intake

If your dock has a fan or suction port (for auto-empty models), check for dust buildup. Use a brush or compressed air to clean it.

Check the Dust Bag (Auto-Empty Models)

If you have the Eufy X10 Pro with auto-empty dock, check the dust bag monthly. Replace it when it’s 70–80% full to maintain suction.

Keep the Area Clear

Make sure nothing blocks the dock’s front or sides. The vacuum needs a clear path to return and dock properly.

Troubleshooting Common Cleaning Issues

Even with regular maintenance, you might run into problems. Here’s how to fix the most common issues:

Vacuum Won’t Charge

Check the charging contacts on both the vacuum and dock. Clean them with a dry cloth. Ensure the dock is plugged in and the outlet is working.

Weak Suction

Empty the dustbin, clean the filter, and check for clogs in the brush or intake. Make sure the dustbin is fully inserted.

Brushes Not Spinning

Remove the brushes and cut away any tangled hair. Check that they’re installed correctly and spin freely.

Navigation Errors

Clean the camera and sensors. Ensure the room is well-lit—the camera needs light to map effectively.

Vacuum Gets Stuck

Check wheels for debris. Make sure the floor isn’t too cluttered. Update the app and reset the map if needed.

How Often Should You Clean Your Eufy X10 Pro?

Cleaning frequency depends on usage, but here’s a simple schedule:

• After every use: Empty the dustbin
• Weekly: Clean brushes, wheels, and sensors
• Monthly: Wash the filter, clean the dock, check vents
• Every 3–6 months: Replace the filter, inspect for wear

If you have pets, kids, or high-traffic areas, increase the frequency. The Eufy app can also send maintenance reminders based on usage.

Using the Eufy App for Maintenance

The Eufy app isn’t just for scheduling cleanings—it’s also a great tool for tracking maintenance.

Set Cleaning Reminders

Go to the app’s settings and enable notifications for filter replacement, brush cleaning, and dustbin emptying.

Check Usage Stats

View how many hours your vacuum has run and how many times it’s cleaned. This helps you stay on top of upkeep.

Update Firmware

Keep your vacuum’s software updated for the best performance and bug fixes.

Final Tips for Long-Term Care

• Store your Eufy X10 Pro in a dry, cool place when not in use.
• Avoid cleaning wet spills—this vacuum is not designed for liquids.
• Use original Eufy replacement parts for filters and brushes.
• Keep the original cleaning tool in a handy spot so you don’t lose it.
• If you’re going on vacation, empty the dustbin and clean the filter before leaving.

Conclusion

Cleaning your Eufy X10 Pro doesn’t have to be a chore. With just a few minutes of care each week, you can keep your robot vacuum running like new. From emptying the dustbin to maintaining brushes and sensors, each step plays a vital role in performance and longevity.

By following this guide, you’ll enjoy stronger suction, smarter navigation, and fewer repairs. Plus, your home will stay cleaner with less effort. Remember: a clean vacuum is a happy vacuum. So grab your microfiber cloth, follow these steps, and let your Eufy X10 Pro do what it does best—clean your floors, so you don’t have to.