How to Clean Eufy X10 Pro Omni

This guide walks you through how to clean Eufy X10 Pro Omni thoroughly and safely. You’ll learn essential maintenance steps, avoid common mistakes, and keep your robot vacuum performing at its best for years.

Key Takeaways

• Regular cleaning extends lifespan: Cleaning your Eufy X10 Pro Omni weekly prevents clogs, maintains suction power, and reduces wear on internal components.
• Disassemble key parts carefully: Remove the dustbin, filters, brushes, and mop pads properly to avoid damage during cleaning.
• Use only recommended tools: Stick to soft brushes, microfiber cloths, and mild cleaners—avoid harsh chemicals or water near electronics.
• Clean the charging contacts: Wipe the robot’s charging pins and dock contacts monthly to ensure reliable recharging.
• Check sensors and wheels: Clear debris from cliff sensors, side brushes, and wheel housings to maintain navigation accuracy.
• Replace filters and brushes as needed: Follow Eufy’s replacement schedule—typically every 2–3 months—for optimal performance.
• Store in a dry, safe place: Keep your robot and dock away from moisture and direct sunlight when not in use.

How to Clean Eufy X10 Pro Omni: A Complete Maintenance Guide

Keeping your Eufy X10 Pro Omni clean isn’t just about tidiness—it’s about performance, longevity, and hygiene. This advanced robot vacuum and mop combo packs powerful suction, smart navigation, and self-cleaning features, but even the most high-tech devices need regular upkeep. Without proper cleaning, dust, hair, and grime can clog filters, dull brushes, and interfere with sensors, leading to poor cleaning results or even system errors.

In this comprehensive guide, you’ll learn exactly how to clean Eufy X10 Pro Omni from top to bottom. We’ll cover everything from daily quick cleanups to deep monthly maintenance, including step-by-step instructions, pro tips, and troubleshooting advice. Whether you’re a new owner or a long-time user, this guide will help you keep your robot running like new.

Let’s dive in!

Why Cleaning Your Eufy X10 Pro Omni Matters

Before we get into the nitty-gritty, let’s talk about why cleaning matters. The Eufy X10 Pro Omni is designed to automate your cleaning routine, but it can’t do its job well if it’s full of dirt. Over time, debris builds up in the dustbin, clogs the filters, tangles around the brushes, and sticks to sensors. This not only reduces suction power but can also cause the robot to get stuck, miss spots, or even trigger error codes.

Regular cleaning helps:
– Maintain strong suction and mopping performance
– Prevent unpleasant odors from trapped dirt
– Extend the life of replaceable parts like filters and brushes
– Ensure accurate navigation and obstacle detection
– Reduce the risk of overheating or motor strain

Think of it like changing the oil in your car—you wouldn’t skip that, right? The same logic applies here. A little effort now saves you time, money, and frustration later.

What You’ll Need to Clean Your Eufy X10 Pro Omni

Before starting, gather these supplies to make the process smooth and safe:

• Soft-bristled brush (like a clean toothbrush)
• Microfiber cloths
• Mild dish soap or Eufy-recommended cleaner
• Compressed air (optional, for hard-to-reach areas)
• Small bowl of warm water
• Tweezers or needle-nose pliers (for removing hair)
• Replacement parts (if needed): HEPA filter, main brush, side brushes, mop pads

Avoid using:
– Bleach or ammonia-based cleaners
– Excessive water near electronic components
– Abrasive scrubbers that could scratch surfaces

With your toolkit ready, let’s begin the cleaning process.

Step 1: Power Down and Prepare the Robot

Safety first! Always turn off your Eufy X10 Pro Omni before cleaning. Press and hold the power button until the robot shuts down completely. This prevents accidental activation and protects internal electronics.

Next, remove the robot from its docking station. Place it on a clean, flat surface—like a table or countertop—where you have room to work. Make sure the area is well-lit so you can see small parts and debris clearly.

If your robot has just finished a cleaning cycle, let it cool down for 10–15 minutes. The motor and internal components can get warm during operation, and cleaning while hot may cause damage or discomfort.

Step 2: Empty and Clean the Dustbin

The dustbin is the heart of your robot’s cleaning system—and it gets dirty fast. Here’s how to clean it properly.

Remove the Dustbin

Locate the dustbin compartment on the back of the robot. Press the release button (usually marked with a small icon) and gently pull the bin straight out. It should slide out smoothly—don’t force it.

Empty the Contents

Hold the dustbin over a trash can and press the release latch to open the bottom flap. Tap it gently to dislodge any stuck debris. For stubborn dirt, use a soft brush to loosen it.

Rinse the Dustbin

Rinse the dustbin under lukewarm water. Avoid hot water, as it can warp plastic components. Use a drop of mild dish soap and a soft brush to scrub the inside walls, especially around the corners where dust accumulates.

Dry Thoroughly

Shake off excess water and place the dustbin on a clean towel to air-dry completely. Never reinsert a wet dustbin—moisture can damage the motor or cause mold growth. Wait at least 2–3 hours before reinstalling.

Pro Tip:

If you notice a musty smell, soak the dustbin in a mixture of water and white vinegar (1:1 ratio) for 15 minutes before rinsing. This helps eliminate odors and bacteria.

Step 3: Clean or Replace the Filter

The HEPA filter traps fine particles like dust, pollen, and pet dander. Over time, it becomes clogged and loses efficiency. Cleaning it regularly ensures clean air output and strong suction.

Remove the Filter

Open the dustbin compartment and locate the filter inside. It’s usually a rectangular foam or felt pad held in place by a small latch. Gently lift the latch and pull the filter out.

Rinse the Filter

Rinse the filter under cool running water. Do not use soap—it can degrade the filter material. Gently squeeze out excess water (don’t wring or twist). Let it air-dry completely for 24 hours.

Replace When Necessary

Eufy recommends replacing the HEPA filter every 2–3 months, depending on usage. If the filter looks torn, discolored, or doesn’t dry flat, it’s time for a new one. Always use genuine Eufy replacement filters for best results.

Pro Tip:

Tap the filter gently over a trash can before rinsing to remove loose dust. This extends the time between deep cleanings.

Step 4: Clean the Main Brush and Brush Guard

The main brush (also called the roller brush) picks up dirt, hair, and debris from floors. It’s one of the most important parts to clean regularly—especially if you have pets or long hair.

Remove the Main Brush

Flip the robot over and locate the brush cover on the underside. Use a coin or flat tool to turn the locking screw counterclockwise. Lift the cover and pull out the main brush.

Remove Hair and Debris

Use scissors or a seam ripper to carefully cut through tangled hair wrapped around the brush. Pull the strands out with tweezers or your fingers. Be thorough—even small bits can reduce efficiency.

Clean the Brush and Housing

Rinse the brush under water if it’s very dirty, but avoid soaking it for long. Wipe the brush guard and housing with a damp cloth. Dry everything completely before reassembly.

Inspect for Damage

Check the brush for cracks, fraying, or worn bristles. If it’s damaged, replace it with a new one. Eufy sells replacement main brushes designed specifically for the X10 Pro Omni.

Pro Tip:

After cleaning, spin the brush by hand. It should rotate smoothly. If it feels stiff or makes noise, double-check for hidden debris.

Step 5: Clean the Side Brushes

The side brushes (or corner brushes) sweep debris toward the main brush. They’re small but essential for edge cleaning.

Remove the Side Brushes

Each side brush is held in place by a small screw. Use a Phillips-head screwdriver to remove it. Gently pull the brush off the motor shaft.

Clean the Brushes

Remove any hair or string wrapped around the base. Rinse the brushes under water and let them dry completely. Avoid submerging the motor area.

Reinstall Securely

Place the brush back on the shaft and tighten the screw. Make sure it spins freely when you test it.

Pro Tip:

If the side brushes wear down or lose flexibility, replace them every 3–4 months. Worn brushes won’t sweep effectively.

Step 6: Clean the Mop Pads and Water Tank

The Eufy X10 Pro Omni includes a mopping function with reusable microfiber pads. Keeping these clean ensures effective floor cleaning and prevents bacteria buildup.

Remove the Mop Pads

Open the mop pad holder on the bottom of the robot. Pull the used pads out by the tabs.

Wash the Pads

Machine wash the pads in cold water with mild detergent. Avoid fabric softeners—they reduce absorbency. Air-dry completely before reuse.

Clean the Water Tank

Remove the water tank from the robot. Empty any leftover water and rinse the tank with clean water. Wipe the inside with a cloth if needed. Let it dry upside down.

Check the Water Flow

After reassembly, run a quick mop test on a small area. If water isn’t flowing, check for clogs in the nozzle or tubing. Use a pin or compressed air to clear blockages.

Pro Tip:

Use only clean, room-temperature water in the tank. Never add cleaning solutions unless approved by Eufy—most aren’t compatible and can damage the system.

Step 7: Clean the Sensors and Charging Contacts

Sensors help your robot navigate, avoid obstacles, and dock properly. Dirty sensors can cause errors or poor performance.

Locate the Sensors

The Eufy X10 Pro Omni has several sensors:
– Cliff sensors (on the bottom)
– Bumper sensors (front)
– Docking sensors (back)
– Camera lens (top, for navigation)

Wipe with a Dry Cloth

Use a clean, dry microfiber cloth to gently wipe each sensor. Avoid moisture—water can damage sensitive electronics.

Clean Charging Contacts

Wipe the metal charging pins on the robot and the corresponding contacts on the dock with a dry cloth. Dirt or corrosion here can prevent proper charging.

Pro Tip:

If the robot struggles to dock, clean the sensors and contacts first. It’s often the simplest fix.

Step 8: Clean the Wheels and Wheel Housings

The wheels allow your robot to move smoothly. Debris stuck in the wheels or axles can cause jerky movement or error messages.

Inspect the Wheels

Flip the robot over and check the main wheels and casters. Look for hair, string, or dirt wrapped around the axles.

Remove Debris

Use tweezers or a small brush to pull out tangled material. For stubborn grime, wipe the wheels with a damp cloth.

Lubricate (If Needed)

Eufy doesn’t recommend regular lubrication, but if a wheel feels stiff, apply a tiny drop of silicone-based lubricant to the axle. Avoid oil-based products—they attract dirt.

Pro Tip:

Rotate the wheels by hand after cleaning. They should spin freely without resistance.

Step 9: Clean the Docking Station

The dock charges your robot and may include a self-cleaning or auto-empty feature. Keeping it clean ensures reliable operation.

Wipe the Surface

Use a damp cloth to wipe the top and sides of the dock. Remove dust, pet hair, or spills.

Clean the Charging Pins

Wipe the metal contacts on the dock with a dry cloth. If corrosion is present, use a cotton swab with a drop of isopropyl alcohol (90% or higher).

Check the Dust Bag (If Applicable)

If your dock has an auto-empty function, check the dust bag regularly. Replace it when it’s 70–80% full to maintain suction.

Pro Tip:

Place the dock on a hard, flat surface away from high-traffic areas. This reduces wear and tear.

Step 10: Reassemble and Test

Once all parts are clean and dry, it’s time to put your robot back together.

Reinstall Components

– Insert the dry dustbin and filter
– Reattach the main brush and cover
– Secure the side brushes
– Reinstall the mop pads and water tank

Power On and Test

Place the robot on the dock and turn it on. Wait for it to charge and run a quick cleaning cycle. Listen for unusual noises and watch for proper movement.

Check Performance

After the test run, inspect the cleaned area. If suction or mopping seems weak, double-check for clogs or improperly installed parts.

Troubleshooting Common Cleaning Issues

Even with regular maintenance, you might run into problems. Here’s how to fix common issues:

Robot Won’t Dock

– Clean the docking sensors and charging contacts
– Ensure the dock is on a flat, unobstructed surface
– Restart the robot and dock

Weak Suction

– Check for clogs in the dustbin, filter, or air path
– Replace the filter if it’s old or damaged
– Clean the main brush and side brushes

Mop Not Working

– Refill the water tank
– Check for clogs in the water nozzle
– Ensure the mop pads are properly attached

Unusual Noises

– Inspect the main brush and wheels for debris
– Tighten loose screws
– Replace worn brushes

Error Codes

Refer to the Eufy app or user manual for specific error meanings. Common fixes include cleaning sensors, restarting the robot, or updating firmware.

How Often Should You Clean Your Eufy X10 Pro Omni?

Cleaning frequency depends on usage, but here’s a general schedule:

• Daily: Empty the dustbin after each use (if full)
• Weekly: Clean the dustbin, filter, brushes, and mop pads
• Monthly: Deep clean sensors, wheels, dock, and charging contacts
• Every 2–3 Months: Replace filters, main brush, and side brushes

If you have pets, allergies, or high foot traffic, clean more often.

Final Tips for Long-Term Care

– Always use genuine Eufy replacement parts
– Keep the robot and dock in a dry, cool place
– Update the robot’s firmware regularly via the Eufy app
– Avoid cleaning very wet or sticky spills—pre-clean them first
– Store extra parts in a clean, labeled container

Conclusion

Cleaning your Eufy X10 Pro Omni doesn’t have to be complicated. With the right tools and routine, you can keep your robot vacuum and mop performing at its best for years. By following this guide on how to clean Eufy X10 Pro Omni, you’ll prevent clogs, maintain suction, protect sensors, and extend the life of your device.

Remember: a clean robot is a happy robot. Spend 10–15 minutes each week on maintenance, and you’ll save hours of frustration down the road. Your floors—and your robot—will thank you.