How to Clean Wheel on Eufy Robo Vac 11+

This guide walks you through how to clean the wheel on your Eufy Robo Vac 11+ to maintain optimal performance. You’ll learn safe disassembly, effective cleaning methods, and how to prevent future buildup.

Key Takeaways

• Regular cleaning prevents clogs: Hair, dust, and debris can wrap around the wheels and hinder movement, so cleaning every 2–4 weeks is essential.
• Use the right tools: A soft brush, microfiber cloth, scissors, and compressed air help remove stubborn dirt without damaging parts.
• Disassemble carefully: Follow the correct order to remove side brushes, wheel covers, and main wheels to avoid breaking clips or connectors.
• Check for wear and tear: Inspect wheels and axles during cleaning—replace if cracked, warped, or not spinning freely.
• Reassemble properly: Ensure all parts click into place and test the vacuum before resuming normal use.
• Prevent future buildup: Trim pet hair regularly and avoid vacuuming over loose threads or cords.
• Troubleshoot common issues: If wheels still don’t spin, check for hidden debris or motor problems.

How to Clean Wheel on Eufy Robo Vac 11+: A Complete Step-by-Step Guide

Keeping your Eufy Robo Vac 11+ in top shape doesn’t require a technician—just a little time and the right approach. One of the most important maintenance tasks is cleaning the wheels. Over time, hair, dust, string, and small debris can wrap around the wheels and axles, slowing down your robot or even causing it to stop moving altogether. If your vacuum seems sluggish, gets stuck often, or makes grinding noises, it’s likely time to clean the wheels.

In this guide, you’ll learn exactly how to clean the wheel on your Eufy Robo Vac 11+—safely, thoroughly, and efficiently. We’ll walk you through every step, from gathering supplies to reassembling your vacuum and testing its performance. Whether you’re a first-time owner or a seasoned user, this guide will help you extend the life of your robot vacuum and keep it running like new.

By the end of this article, you’ll know how to:
– Identify when your wheels need cleaning
– Disassemble the wheel components without damage
– Remove hair and debris effectively
– Reassemble and test your vacuum
– Prevent future buildup

Let’s get started!

Why Cleaning the Wheels Matters

Your Eufy Robo Vac 11+ relies on two main wheels and two side brushes to navigate your home. The main wheels—located on either side of the vacuum—are responsible for movement, while the side brushes sweep debris toward the suction inlet. When these components get clogged, your vacuum can’t move properly, leading to poor cleaning performance, frequent errors, or even motor strain.

Common signs that your wheels need cleaning include:
– The vacuum stops moving or gets stuck in one spot
– You hear a grinding or clicking noise during operation
– The wheels spin unevenly or not at all
– The robot struggles to climb over thresholds or rugs

Ignoring these signs can lead to long-term damage. For example, if hair wraps tightly around the axle, it can cause the motor to overheat or wear out prematurely. Regular cleaning—every 2 to 4 weeks, depending on your home environment—can prevent these issues and keep your Eufy running smoothly.

Tools and Supplies You’ll Need

Before you begin, gather the following tools and supplies. Most are household items, so you likely already have them on hand.

• Soft-bristled brush: An old toothbrush works perfectly for scrubbing tight spaces.
• Microfiber cloth: Ideal for wiping down surfaces without leaving lint.
• Scissors or seam ripper: Useful for cutting away tangled hair or string.
• Compressed air (optional): Helps blow out dust from hard-to-reach areas.
• Tweezers: Great for pulling out small debris stuck in wheel housings.
• Small container: To hold screws and small parts so you don’t lose them.
• Flathead screwdriver (optional): May help gently pry off clips if needed.

Having these tools ready will make the process faster and more efficient. Avoid using water or liquid cleaners directly on the wheels or internal components, as moisture can damage the motors or electronics.

Step 1: Power Off and Prepare Your Workspace

Safety first! Before you start cleaning, make sure your Eufy Robo Vac 11+ is completely powered off. Press and hold the power button until the vacuum shuts down. Then, unplug it from the charging dock if it’s connected.

Next, find a clean, well-lit workspace—like a table or countertop—with enough room to lay out the vacuum and your tools. A flat surface helps prevent small parts from rolling away. Lay down a soft cloth or towel to protect the vacuum’s underside from scratches.

If your vacuum has been running recently, give it 10–15 minutes to cool down. Motors can get warm during operation, and handling them while hot may cause discomfort or damage.

Step 2: Remove the Side Brushes

The side brushes are located on the front corners of the vacuum and are held in place by small screws. These brushes often collect hair and debris, which can transfer to the wheels, so it’s best to clean them first.

Locate the Side Brush Screws

Flip the vacuum over so the underside is facing up. You’ll see two round brushes on either side of the front. Each brush is secured by a single Phillips-head screw in the center.

Unscrew and Remove the Brushes

Use a small Phillips screwdriver to carefully remove the screws. Place them in your container so you don’t lose them. Once the screws are out, gently lift the brushes off the axles.

Clean the Side Brushes

Use your fingers to pull away any hair or string wrapped around the bristles. For stubborn debris, use scissors to cut it free. Then, use the soft brush to scrub the bristles and remove dust. Wipe the brush base with a microfiber cloth.

Inspect the Brush Housings

While the brushes are off, take a moment to clean the area where they attach. Use the toothbrush and tweezers to remove any buildup in the housing. This prevents debris from migrating to the wheels later.

Reattach the Side Brushes

Once clean, place the brushes back onto the axles and secure them with the screws. Make sure they spin freely—this ensures they’ll work properly when reinstalled.

Step 3: Remove the Main Wheels

The main wheels are located on either side of the vacuum, just behind the side brushes. These are the primary drivers of your Eufy, so they tend to collect the most debris.

Locate the Wheel Covers

Each wheel is covered by a plastic housing that snaps into place. These covers protect the internal components but must be removed to access the wheels.

Gently Pry Off the Wheel Covers

Use your fingers or a flathead screwdriver to carefully pry off the wheel covers. Start at the top edge and work your way around. Be gentle—these clips can break if forced. If a cover feels stuck, wiggle it slightly rather than pulling hard.

Remove the Wheels

Once the cover is off, you’ll see the wheel attached to a metal axle. The wheel should slide off easily. If it’s stuck, gently wiggle it back and forth while pulling. Avoid using excessive force, as this can damage the axle or motor connection.

Inspect the Axle and Housing

With the wheel removed, check the axle for hair, dust, or grime. Use the toothbrush to scrub the axle and the surrounding housing. Tweezers are helpful for pulling out long strands of hair wrapped tightly around the shaft.

Clean the Wheel Itself

Hold the wheel under warm (not hot) running water to rinse off dirt. Use the toothbrush to scrub the treads and remove embedded debris. Avoid submerging the entire wheel if it has electronic components—most Eufy wheels are sealed, but it’s best to be cautious.

After rinsing, dry the wheel thoroughly with a microfiber cloth. Let it air-dry completely before reassembly. Moisture left inside can cause rust or electrical issues.

Step 4: Clean the Wheel Housings and Internal Components

Even after removing the wheels, debris can remain inside the housing. This buildup can interfere with wheel movement and cause noise or errors.

Use Compressed Air (Optional)

If you have compressed air, use short bursts to blow dust out of the wheel cavity. Hold the can upright and keep it at least 6 inches away to avoid moisture buildup.

Scrub with a Toothbrush

Use the soft-bristled brush to scrub the interior of the housing. Pay special attention to the area around the motor shaft and any small crevices where dirt accumulates.

Wipe with a Microfiber Cloth

Dampen a corner of the cloth slightly (just enough to pick up dust, not soak the area) and wipe down the interior. Avoid getting water near the motor or electrical contacts.

Check for Obstructions

Look for small objects like paper clips, beads, or bits of plastic that may have fallen into the housing. Use tweezers to remove them.

Step 5: Reassemble the Wheels

Once everything is clean and dry, it’s time to put your Eufy back together.

Reinstall the Wheels

Slide each wheel back onto its axle. Make sure it sits flush and spins freely. If it feels stiff or wobbly, double-check that no debris is blocking the axle.

Replace the Wheel Covers

Align the cover with the housing and press it firmly into place. You should hear a soft click when it’s secure. If a cover doesn’t snap in, check that the wheel is properly seated and the clips aren’t bent.

Test Wheel Movement

Before reassembling the side brushes, gently spin each wheel with your finger. It should rotate smoothly without resistance. If it doesn’t, recheck for debris or misalignment.

Step 6: Reattach the Side Brushes

Now that the main wheels are back in place, reinstall the side brushes.

Align the Brushes

Place each brush onto its axle, making sure the screw hole lines up.

Secure with Screws

Use your screwdriver to tighten the screws. Don’t overtighten—just snug enough to hold the brush in place.

Test Brush Spin

Give each brush a gentle spin to ensure it rotates freely. If it’s stiff, loosen the screw slightly or check for debris.

Step 7: Final Inspection and Testing

Before you put your Eufy back to work, do a final check to make sure everything is properly assembled.

Flip the Vacuum Over

Turn your Eufy right-side up and inspect the underside. All components should be securely in place with no loose parts.

Power On and Test

Place the vacuum on the floor and press the power button. Let it run for a minute or two. Listen for unusual noises and watch the wheels to ensure they’re spinning smoothly.

Run a Short Cleaning Cycle

Start a quick cleaning cycle in a small area. Observe how the vacuum moves—does it navigate well? Does it get stuck? If everything looks good, you’re all set!

Troubleshooting Common Wheel Issues

Even after cleaning, you might encounter problems. Here’s how to handle common issues:

Wheels Still Don’t Spin

If a wheel isn’t moving after cleaning, check for:
– Hidden debris in the motor housing
– A damaged axle or wheel
– A faulty motor (rare, but possible)

Try spinning the wheel manually. If it’s completely stuck, the motor may need professional repair.

Vacuum Makes Grinding Noises

This usually means something is still stuck. Recheck the wheel axles and housings. Also, inspect the side brushes—sometimes debris gets trapped underneath.

Wheels Spin Unevenly

Uneven spinning can indicate a bent axle or unbalanced wheel. Remove the wheel and inspect it for warping. If it’s damaged, consider replacing it.

Vacuum Gets Stuck Frequently

If your Eufy keeps getting stuck after cleaning, check the cliff sensors and wheels for residual dirt. Also, ensure the wheels are fully seated and the covers are snapped on correctly.

Preventing Future Buildup

Cleaning your wheels regularly is important, but prevention is even better. Here are some tips to reduce debris accumulation:

• Vacuum regularly: The more often you run your Eufy, the less time hair and dust have to build up.
• Trim pet hair: If you have pets, brush them frequently to reduce shedding.
• Pick up loose items: Before running the vacuum, remove cords, threads, and small objects from the floor.
• Use a brush guard: Some users attach a small mesh guard over the wheels to catch hair before it wraps around the axle.
• Schedule monthly maintenance: Set a reminder to clean the wheels, brushes, and filters every 4 weeks.

When to Replace Wheels or Brushes

Even with regular cleaning, parts will eventually wear out. Here’s when to consider replacement:

• Wheels: Replace if cracked, warped, or no longer grip the floor properly.
• Side brushes: Replace if bristles are frayed, bent, or no longer spin freely.
• Axles: If an axle is bent or corroded, it may need professional repair.

Eufy sells replacement parts online, and installation is straightforward using the same steps outlined in this guide.

Conclusion

Cleaning the wheels on your Eufy Robo Vac 11+ is a simple but essential task that keeps your vacuum running efficiently. By following this step-by-step guide, you’ve learned how to safely disassemble, clean, and reassemble the wheels and side brushes. Regular maintenance not only improves performance but also extends the life of your robot vacuum.

Remember to clean the wheels every 2–4 weeks, especially if you have pets or long-haired family members. Use the right tools, take your time, and always test your vacuum after reassembly. With a little care, your Eufy will continue to keep your floors spotless for years to come.

Now that you know how to clean the wheel on your Eufy Robo Vac 11+, you can tackle this task with confidence. Happy cleaning!