How to Change Eufy E25 Mop

This guide walks you through how to change the Eufy E25 mop with clear, easy-to-follow steps. Whether you’re a first-time user or need a refresher, you’ll learn how to replace the mop pad, maintain performance, and troubleshoot common issues.

Key Takeaways

• Regular mop pad changes improve cleaning efficiency: A fresh pad ensures better absorption and prevents dirt from being redeposited on your floors.
• Changing the mop is quick and tool-free: The Eufy E25 uses a simple Velcro-style attachment, making replacement a breeze.
• Use only compatible Eufy mop pads: Third-party pads may not fit properly or could damage the mopping module.
• Clean the mop module after each use: Wiping down the mop tray prevents mold, odors, and mechanical issues.
• Replace pads based on usage, not just time: Heavy use may require more frequent changes than light cleaning schedules.
• Store extra pads in a dry place: Moisture can degrade the fabric and reduce effectiveness.
• Reset the mop pad counter in the app: This helps track usage and reminds you when it’s time for a new pad.

How to Change Eufy E25 Mop: A Complete Step-by-Step Guide

Keeping your Eufy E25 robot vacuum in top shape means more than just emptying the dustbin or charging the battery. One of the most overlooked—but essential—maintenance tasks is changing the mop pad. Over time, the reusable microfiber pad collects dirt, grime, and bacteria, reducing its effectiveness and potentially leaving streaks or odors on your floors. Fortunately, changing the Eufy E25 mop is a simple, tool-free process that takes less than two minutes. In this comprehensive guide, we’ll walk you through every step, from preparing your robot to installing a new pad and maintaining the mopping system for long-term performance.

Whether you’re a new Eufy E25 owner or you’ve been using it for months and just need a refresher, this guide will ensure you get the most out of your robot’s mopping function. We’ll cover everything from identifying when it’s time for a new pad, to proper cleaning techniques, troubleshooting common issues, and even tips for maximizing pad lifespan. By the end, you’ll be a pro at keeping your floors clean and your Eufy E25 running smoothly.

Why Changing the Mop Pad Matters

Before diving into the how-to, it’s important to understand why changing the mop pad regularly is so crucial. The Eufy E25 uses a dual-function system: it vacuums and mops simultaneously, making it a powerful tool for maintaining hard floors like tile, hardwood, laminate, and vinyl. The mop pad is the workhorse of this system—it absorbs water from the tank, wipes away spills, and lifts light dirt and dust.

However, after repeated use, the pad becomes saturated with dirt, oils, and cleaning solution residue. This not only reduces its absorbency but can also lead to unpleasant odors, bacterial growth, and streaky floors. In severe cases, a dirty pad can even scratch delicate flooring or clog the mop module’s water distribution system.

Replacing the pad regularly ensures:
– Consistent cleaning performance
– Better water absorption and distribution
– Prevention of cross-contamination between rooms
– Longer lifespan of your robot’s mopping components

Most users should change the pad after every 2–3 cleaning cycles, or whenever it appears visibly soiled. If you have pets, kids, or high foot traffic, you may need to change it more often.

What You’ll Need

Thankfully, changing the Eufy E25 mop pad requires minimal supplies. Here’s what you should have on hand:

• A replacement Eufy E25 mop pad: Always use genuine Eufy pads (model: T2170) for the best fit and performance. These are available on the official Eufy website, Amazon, or authorized retailers.
• Clean, dry hands: Avoid handling the new pad with dirty or wet hands to keep it clean.
• A trash bag or compost bin: For disposing of the old pad if it’s too dirty to reuse.
• Mild detergent and warm water (optional): If you plan to wash and reuse the pad (more on that later).
• Soft cloth or paper towel: For cleaning the mop module.

You won’t need any tools—the Eufy E25 is designed for user-friendly maintenance.

Step-by-Step: How to Change the Eufy E25 Mop Pad

Now that you understand the importance and have your supplies ready, let’s walk through the actual process. Follow these steps carefully to ensure a smooth and effective pad replacement.

Step 1: Power Off the Robot

Safety first! Before handling any part of your Eufy E25, make sure it’s powered off. You can do this by pressing and holding the power button on the robot until it shuts down, or by placing it on the charging dock and ensuring it’s not actively cleaning.

Why is this important? Even though the robot isn’t moving, internal components may still be active. Turning it off prevents accidental activation and protects you from any unexpected movements.

Step 2: Remove the Mop Module

The mop module is the rectangular attachment at the back of the Eufy E25. It houses the water tank and the mop pad. To remove it:

1. Flip the robot upside down so the bottom is facing up.
2. Locate the mop module—it’s held in place by two clips on either side.
3. Gently press the release buttons (small plastic tabs) on both sides of the module.
4. While holding the buttons, slide the module backward and lift it out.

Be careful not to force it. The clips are designed to release easily, but excessive pressure could damage the plastic.

Step 3: Remove the Old Mop Pad

Once the mop module is out, you’ll see the used mop pad attached to the bottom via Velcro strips. Here’s how to remove it:

1. Peel the old pad away from the module. Start at one corner and work your way across.
2. If the pad is stuck due to dried cleaning solution or dirt, gently rub the Velcro area with your fingers to loosen it.
3. Dispose of the old pad if it’s too dirty to reuse. If it’s still in decent condition, you can wash it (see the cleaning section below).

Tip: If the Velcro on the module feels less sticky, wipe it with a damp cloth to remove debris. This helps maintain a strong hold for the new pad.

Step 4: Clean the Mop Module (Recommended)

Before installing a new pad, take a moment to clean the mop module. Over time, water residue, dirt, and cleaning solution can build up inside, leading to clogs or odors.

1. Use a soft cloth or paper towel to wipe the bottom of the module, especially around the water outlet holes.
2. If there’s visible grime, dampen the cloth with warm water and mild detergent. Avoid soaking the module.
3. Check the water tank for leaks or cracks. If you notice any, contact Eufy support.
4. Allow the module to air dry completely before reassembling.

This quick cleaning step can significantly extend the life of your mop system and improve water flow.

Step 5: Attach the New Mop Pad

Now it’s time to install the fresh pad. Follow these steps for a secure fit:

1. Take the new Eufy E25 mop pad out of its packaging. It should be flat and free of wrinkles.
2. Align the pad with the bottom of the mop module. The Velcro strips on the pad should match the corresponding areas on the module.
3. Press the pad firmly onto the module, starting from the center and working outward to avoid air pockets.
4. Run your fingers along the edges to ensure it’s fully secured and lies flat.

A properly attached pad should not flap or curl at the edges. If it does, remove and reapply it.

Step 6: Reinstall the Mop Module

With the new pad in place, it’s time to put the module back into the robot:

1. Hold the module with the pad facing down.
2. Align the front edge of the module with the slot on the robot’s underside.
3. Slide the module forward until it clicks into place.
4. Press down gently on both sides to ensure it’s fully seated.

You should hear a soft click when it’s properly installed. If it feels loose, remove and reinsert it.

Step 7: Reset the Mop Pad Counter (Optional but Recommended)

The Eufy Home app includes a feature that tracks mop pad usage. Resetting this counter helps you stay on top of maintenance.

1. Open the Eufy Home app on your smartphone.
2. Select your Eufy E25 robot.
3. Go to “Settings” > “Mop Pad” or “Maintenance.”
4. Tap “Reset Mop Pad Counter.”

This won’t affect performance, but it’s a helpful reminder for future replacements.

Step 8: Test the Mop Function

Before letting your robot loose on your floors, do a quick test:

1. Place the robot on a small, clean area of hard flooring.
2. Start a mopping cycle using the app or the robot’s controls.
3. Observe the water flow and pad movement. The pad should glide smoothly and distribute water evenly.
4. If you notice dry spots or excessive dripping, check the water tank level and pad attachment.

If everything looks good, your Eufy E25 is ready to clean!

How Often Should You Change the Mop Pad?

There’s no one-size-fits-all answer, but here are some general guidelines:

• Light use (1–2 times per week): Change the pad every 3–4 cleaning cycles.
• Moderate use (3–4 times per week): Change every 2–3 cycles.
• Heavy use (daily or with pets/kids): Change after every 1–2 cycles.

Also, inspect the pad after each use. If it’s visibly dirty, smells musty, or leaves streaks, it’s time for a new one—even if it hasn’t been used many times.

Can You Wash and Reuse the Mop Pad?

Yes! The Eufy E25 mop pad is reusable and machine-washable. Here’s how to clean it properly:

1. Rinse the pad under cold water immediately after use to remove loose dirt.
2. Wash it in a gentle cycle with mild detergent. Avoid fabric softeners—they can coat the fibers and reduce absorbency.
3. Air dry completely. Do not use a dryer, as heat can damage the microfiber.
4. Store in a dry, breathable bag or container.

Most users can reuse a pad 3–5 times before it starts to degrade. Replace it when it loses its texture, becomes stiff, or no longer absorbs water well.

Troubleshooting Common Issues

Even with proper care, you might run into a few hiccups. Here’s how to fix them:

Mop Pad Won’t Stay Attached

Cause: Dirty Velcro or worn-out pad.
Solution: Clean the Velcro on both the pad and module with a damp cloth. If the pad is old, replace it.

Water Isn’t Flowing to the Pad

Cause: Clogged water outlet or empty tank.
Solution: Check the water tank level. Clean the outlet holes on the mop module with a toothpick or soft brush.

Robot Leaves Streaks or Wet Spots

Cause: Over-saturation or dirty pad.
Solution: Reduce the water level in the tank. Use a clean, dry pad and avoid using too much cleaning solution.

Mop Module Won’t Click Into Place

Cause: Misalignment or debris in the slot.
Solution: Remove the module, inspect the robot’s slot for obstructions, and reinsert carefully.

Tips for Maximizing Mop Pad Lifespan

Want to get the most out of each pad? Try these pro tips:

• Use only water or Eufy-approved cleaning solutions: Harsh chemicals can break down the microfiber.
• Empty and dry the water tank after each use: Prevents mold and mineral buildup.
• Rotate between two pads: Lets one dry completely while using the other.
• Avoid mopping very dirty floors: Vacuum first to reduce pad wear.
• Store pads flat: Prevents creases that can affect performance.

Conclusion

Changing the mop pad on your Eufy E25 is a small task with a big impact. By following this guide, you’ll ensure your robot continues to deliver spotless floors with every cleaning cycle. Remember: a clean pad means cleaner floors, better hygiene, and a longer life for your robot’s mopping system.

Make pad replacement part of your regular maintenance routine—along with emptying the dustbin and cleaning the brushes—and your Eufy E25 will thank you with reliable, efficient performance for years to come. With just a few minutes of effort, you can keep your home looking its best, effortlessly.