How to Change Filter in Eufy

Changing the filter in your Eufy vacuum is essential for maintaining suction power and indoor air quality. This guide walks you through the process with clear, simple instructions for all Eufy models.

Key Takeaways

• Regular filter changes improve performance: A clean filter ensures strong suction and prevents dust from recirculating into your home.
• Check your model first: Eufy vacuums vary slightly in design, so identify your specific model before starting.
• Use only genuine Eufy filters: Third-party filters may not fit properly or meet filtration standards.
• Clean reusable filters monthly: Wash and dry them completely before reinserting to avoid mold or damage.
• Replace disposable filters every 2–3 months: Frequency depends on usage and pet hair levels.
• Reset the filter indicator (if applicable): Some models have a reset button to clear the maintenance alert.
• Store spare filters properly: Keep them in a dry, sealed bag to maintain effectiveness.

How to Change Filter in Eufy: A Complete Step-by-Step Guide

Keeping your Eufy vacuum in top shape isn’t just about emptying the dustbin or wiping down the brushes. One of the most overlooked—but crucial—maintenance tasks is changing the filter. Over time, filters trap dust, allergens, pet dander, and debris, which can clog the system and reduce suction power. If you’ve noticed your Eufy isn’t picking up as much dirt as it used to, or if it’s making a louder noise than usual, a dirty or clogged filter might be the culprit.

In this comprehensive guide, you’ll learn exactly how to change the filter in your Eufy vacuum, no matter which model you own. We’ll cover everything from identifying your model and locating the filter compartment to cleaning reusable filters and replacing disposable ones. You’ll also get tips on how often to change your filter, where to buy genuine replacements, and how to troubleshoot common issues.

Whether you’re a first-time Eufy user or just need a refresher, this guide will make filter maintenance quick, easy, and stress-free. Let’s get started!

Why Changing Your Eufy Filter Matters

Before diving into the steps, it’s important to understand why filter maintenance is so critical. The filter in your Eufy vacuum plays a vital role in the cleaning process. As air is sucked into the vacuum, it passes through the filter, which captures fine particles like dust, pollen, and pet hair. Clean air is then expelled back into your home.

When the filter becomes clogged, several things happen:
– Suction power drops significantly.
– Dust and allergens may be blown back into the air.
– The motor has to work harder, which can shorten the vacuum’s lifespan.
– Battery life may decrease due to increased strain.

Regularly changing or cleaning your filter ensures your Eufy runs efficiently, maintains strong suction, and contributes to better indoor air quality. For households with pets, allergy sufferers, or high-traffic areas, this becomes even more important.

Identify Your Eufy Model

Eufy offers a range of robotic and cordless vacuums, and while the filter replacement process is similar across models, there are slight differences. Before you begin, identify your specific model. Common Eufy vacuum series include:
– RoboVac (e.g., RoboVac 11S, G30, G40)
– HomeVac (e.g., HomeVac H11, H30)
– RoboVac X Series (e.g., X8, X8 Hybrid)

You can find your model number:
– On the bottom of the vacuum
– In the user manual
– In the EufyHome app (if connected)

Knowing your model helps you locate the correct filter compartment and ensures you purchase the right replacement filter.

Locate the Filter Compartment

Once you’ve identified your model, the next step is finding the filter. In most Eufy vacuums, the filter is located inside the dustbin or just behind it. Here’s how to find it:

For RoboVac Models (e.g., RoboVac 11S, G30, X8):

1. Turn the vacuum upside down.
2. Locate the dustbin—it’s usually a rectangular compartment near the front.
3. Press the release button to remove the dustbin.
4. Inside the dustbin, you’ll see a small, rectangular filter (often gray or white).

For HomeVac Cordless Models (e.g., H11, H30):

1. Remove the dustbin by pressing the release latch.
2. Look inside the vacuum’s main body—the filter sits just behind the dustbin slot.
3. It’s typically a flat, sponge-like filter held in place by a small cover or clip.

For RoboVac X Series:

1. Flip the vacuum over and remove the dustbin.
2. The filter is located at the back of the dustbin compartment.
3. It may be labeled or colored differently for easy identification.

If you’re unsure, consult your user manual or visit the Eufy support page for your model.

Remove the Old Filter

Now that you’ve located the filter, it’s time to remove it. Be gentle—filters are delicate and can tear if handled roughly.

Step 1: Empty the Dustbin

Before removing the filter, make sure the dustbin is empty. Press the release button and carefully pour the contents into a trash can. Tap it gently to dislodge any stuck debris.

Step 2: Take Out the Filter

– For most models, the filter lifts out easily once the dustbin is removed.
– Some filters are held in place by a small plastic clip or cover. Gently press or slide the clip to release the filter.
– If the filter is stuck, wiggle it slightly while pulling upward. Avoid using tools unless specified in the manual.

Step 3: Inspect the Filter

Check the filter for:
– Excessive dirt or clumping
– Tears or damage
– Mold or unpleasant odor (a sign it needs replacing)

If the filter is reusable and only lightly soiled, you can clean it. If it’s damaged or heavily clogged, it’s time for a replacement.

Clean or Replace the Filter

Eufy filters fall into two categories: reusable and disposable. Knowing which type you have determines your next steps.

Reusable Filters: How to Clean

Many Eufy models come with washable filters made of sponge or HEPA material. Cleaning them regularly extends their life and saves money.

Step 1: Rinse Under Cold Water

Hold the filter under cool, running water. Gently rub it between your fingers to remove dust and debris. Do not use soap, detergent, or hot water—these can damage the filter material.

Step 2: Shake Off Excess Water

After rinsing, shake the filter vigorously to remove as much water as possible.

Step 3: Air Dry Completely

Place the filter on a clean towel in a well-ventilated area. Let it dry for at least 24 hours. Do not use a hairdryer, heater, or direct sunlight—heat can warp or shrink the filter.

Step 4: Reinstall Once Dry

Only reinsert the filter when it’s 100% dry. A damp filter can promote mold growth and damage the motor.

Disposable Filters: When to Replace

Some Eufy models use non-washable HEPA filters designed for single use. These should be replaced every 2–3 months, or sooner if you have pets or allergies.

Step 1: Buy a Genuine Eufy Filter

Always use official Eufy replacement filters. Third-party options may not fit properly or meet filtration standards. You can purchase them from:
– The official Eufy website
– Amazon (sold by Eufy or authorized sellers)
– Electronics retailers like Best Buy

Step 2: Remove the Old Filter

Follow the same steps as above to take out the old filter.

Step 3: Insert the New Filter

Place the new filter into the compartment, ensuring it sits flat and secure. Some filters have a directional arrow—make sure it faces the correct way (usually toward the airflow).

Step 4: Reattach the Dustbin

Slide the dustbin back into place until it clicks. Make sure it’s fully seated to avoid leaks or reduced suction.

Reset the Filter Indicator (If Applicable)

Some Eufy models, like the RoboVac G30 or X8, have a filter maintenance indicator that lights up when it’s time to clean or replace the filter. After changing the filter, you may need to reset this alert.

How to Reset the Filter Alert:

1. Turn on your Eufy vacuum.
2. Press and hold the “Clean” and “Home” buttons simultaneously for 3–5 seconds.
3. The indicator light should flash and then turn off, confirming the reset.

If your model doesn’t have a filter indicator, you can track filter changes manually using a calendar or the EufyHome app.

How Often Should You Change the Filter?

The frequency of filter changes depends on several factors:
– **Usage:** Vacuum daily? Replace every 2 months. Weekly? Every 3–4 months.
– **Pets:** Pet hair clogs filters faster—replace every 1–2 months.
– **Allergies:** If you or a family member has allergies, clean or replace filters monthly.
– **Environment:** Dusty homes or construction zones require more frequent changes.

As a general rule:
– Clean reusable filters every 4–6 weeks.
– Replace disposable filters every 2–3 months.

Set a reminder on your phone or mark your calendar to stay on track.

Tips for Maintaining Your Eufy Filter

To get the most out of your filter and vacuum, follow these best practices:

1. Empty the Dustbin After Every Use

A full dustbin puts extra strain on the filter. Empty it regularly to reduce clogging.

2. Clean the Brush Roll Weekly

Hair and string wrapped around the brush can push debris into the filter. Remove the brush and clean it with scissors or a brush tool.

3. Check for Blockages

Inspect the air path, including the intake and exhaust vents, for clogs. Use a flashlight to spot hidden debris.

4. Store Spare Filters Properly

Keep replacement filters in their original packaging or a sealed plastic bag in a cool, dry place. Avoid humidity, which can degrade the material.

5. Use the EufyHome App

The app tracks cleaning cycles and can notify you when maintenance is due. It’s a handy tool for staying proactive.

Troubleshooting Common Filter Issues

Even with proper care, you might run into problems. Here’s how to fix the most common issues:

Issue: Filter Won’t Fit After Cleaning

Solution: The filter may have shrunk slightly after drying. Gently stretch it back to shape. If it’s still too small, it may be damaged—replace it.

Issue: Vacuum Loses Suction After Filter Change

Solution: Double-check that the filter is installed correctly and the dustbin is fully seated. Also, ensure no debris is blocking the air path.

Issue: Filter Smells Bad

Solution: A musty odor indicates mold. Replace the filter immediately and clean the dustbin and compartment with a damp cloth.

Issue: Filter Indicator Won’t Reset

Solution: Make sure you’re holding the correct buttons for the right amount of time. If it still doesn’t work, restart the vacuum or check for software updates in the app.

Issue: Filter Tears During Removal

Solution: Use gentle pressure. If the filter is old or brittle, it’s time for a replacement. Avoid forcing it.

Where to Buy Genuine Eufy Filters

Using authentic Eufy filters ensures compatibility and performance. Here are the best places to buy:
– **Eufy Official Website:** Offers the full range of filters with warranty protection.
– **Amazon:** Look for “Sold by Eufy” or “Fulfilled by Amazon” to avoid counterfeits.
– **Retail Stores:** Best Buy, Target, and Walmart often carry popular models.

Avoid cheap, unbranded filters—they may not capture fine particles and could void your warranty.

Conclusion

Changing the filter in your Eufy vacuum is a simple but essential task that keeps your device running smoothly and your home cleaner. By following this guide, you’ve learned how to identify your model, locate and remove the filter, clean or replace it properly, and reset maintenance alerts. Regular filter care improves suction, extends the life of your vacuum, and helps maintain healthy indoor air.

Remember: a clean filter means a happy vacuum—and a happier home. Set reminders, use genuine parts, and don’t skip this small step with big results. Your Eufy will thank you with years of reliable performance.